05-28-2021, 01:01 PM
|
#1 |
|
Join Date: May 2021
Posts: 4
|
Apollo 250 Lost compression
So I just changed the oil at 300 miles and after doing so I started it and it started just fine. I let it warm up and then hopped on to see how it ran with fresh oil. After 10 seconds it shut off and began to click in the motor. I tore it down and opened the valve covers to see that the exhaust valve was opening a 1/4 inch. After tightening it back down I still have very low compression. Any suggestions on what I can try and does anyone have any links for a gasket set for it. The full name is the Apollo DB-36 250RX
|
|
|
05-28-2021, 04:38 PM
|
#2 |
|
Join Date: Feb 2007
Location: Virginia
Posts: 269
|
sorry to hear of the issue you're having....probably for better help here on the forum,..we may need clarification on what you mean "exhaust valve was opening a 1/4 inch. After tightening it back down...."
__________________
<div>Steve 2006 Roketa DB-07A/RSX-200E 2008 Roketa 250 Scooter 2019 Brozz 250 |
|
|
|
05-28-2021, 05:54 PM
|
#4 |
|
Join Date: Oct 2020
Location: Flower Mound Texas
Posts: 904
|
Does that use the CB style (OHC) engine, or our CG (OHV) engine?
__________________
2021 Tao Tbr7 - "Lucille" Mods so far- Brozz swingarm, 21" front rim (Bridgestone Tw302 rear/Dunlop D606 front tires), Digital gauge cluster, pz30b pumper carb, after market hand guards, aftermarket brake and clutch levers, round fold away mirrors, Fly handlebars shortened slightly, 13t front sprocket 2009 Q-link Legacy 250 1982 Suzuki GS1100ES - "Jolene" |
|
|
|
|
|
 |
|
|
Linear Mode
