Ordered a Vader 125cc! Parts are on the way :)

Bread816 · 09-06-2021, 02:20 AM

Howdy from Kansas City!

I recently ordered a Boom Vader 125cc from Kronic Racing and expect it to be here within the next week or so. I've obviously been doing a lot of reading about what to do when I get the bike and obviously ordering lots of upgrades.

I've made a pretty decent/detailed list of what I've ordered so far and figured I would share with the group as many others are probably in a similar situation.

If there is anything missing from the list or other upgrades you've found that are worthwhile, please chime in.

Rear Swingarm/Axle and Chain Adjust Hardware

Honda AXLE, RR. WHEEL 42301-K26-900
Honda NUT, U (12MM) (FUJI SEIMITSU) 90306-KGH-901
Honda WASHER, PIVOT BOLT 90122-KWB-600
Honda ADJUSTER, CHAIN 40543-K26-900
Honda CAP, SWINGARM END 40546-K26-900
Honda NUT, SPECIAL (6MM) 90302-KBP-900
Honda NUT, HEX. (6MM) 94001-06200-0S

Swingarm Spools

Fit For 2013-2020 HONDA GROM MSX125 Motorcycle Swing Arm Spools Slider Bobbin
(From racing-knightmotor on eBay. I’m sure I will not end up using all of the above hardware, but these will allow you to use a rear-wheel motorcycle stand)

Rear Shock Hardware
Honda BOLT, FLANGE (10X47) 90123-K26-900

Honda NUT, U (10MM) 90304-KGH-901

Air Filter
K&N Vent Air Filter 62-1514

Carburetor
Generic VM22 26mm from Amazon (Brand: LEIMO)

10pc Carburetor Main Jet for Mikuni VM22 from Amazon (Brand: ARJ)

Spark Plug
NGK CR7HIX

Sprocket
428 17T Sprocket Front Engine Sprocket from Amazon

Fender Eliminator
Kemimoto Grom Fender Eliminator Kits from Amazon

Exhaust
MSX Motorcycle Exhaust Muffler Middle and Front Link Pipe Full System For Honda MSX 125
(From Amazon, but not currently available anymore. This is one of the only systems that fit the Grom clones because full Grom exhaust require you to bend the pipe to fit the exhaust port. This item is only the “header,” so you will still need to purchase a 38-51mm slip-on muffler of your choice)

HIAORS Pit Dirt Bike Exhaust Crush Gasket from Amazon
(These are needed when installing the midpipe listed above per multiple reviews)

I still haven’t decided on a muffler yet! I like the look of the “shorty” carbon fiber ones, but not sure yet. Please post pics/suggestions to mufflers you all have found that sound and look badass!

I look forward to being a part of the group!

Thanks,
Brian

culcune · 09-09-2021, 12:35 AM

Welcome to here! Glad to see Pete has the Vaders back in stock and shipping

TyGuy · 09-09-2021, 07:23 AM

Welcome, and best of luck! Can't wait to see some photos! This looks like a fun list...

Tundra210 · 11-17-2021, 01:51 PM

Hey how's the build going?

09-06-2021, 02:20 AM	#1
Bread816 Join Date: Sep 2021 Posts: 1	Ordered a Vader 125cc! Parts are on the way :) Howdy from Kansas City! I recently ordered a Boom Vader 125cc from Kronic Racing and expect it to be here within the next week or so. I've obviously been doing a lot of reading about what to do when I get the bike and obviously ordering lots of upgrades. I've made a pretty decent/detailed list of what I've ordered so far and figured I would share with the group as many others are probably in a similar situation. If there is anything missing from the list or other upgrades you've found that are worthwhile, please chime in. Rear Swingarm/Axle and Chain Adjust Hardware Honda AXLE, RR. WHEEL 42301-K26-900 Honda NUT, U (12MM) (FUJI SEIMITSU) 90306-KGH-901 Honda WASHER, PIVOT BOLT 90122-KWB-600 Honda ADJUSTER, CHAIN 40543-K26-900 Honda CAP, SWINGARM END 40546-K26-900 Honda NUT, SPECIAL (6MM) 90302-KBP-900 Honda NUT, HEX. (6MM) 94001-06200-0S Swingarm Spools Fit For 2013-2020 HONDA GROM MSX125 Motorcycle Swing Arm Spools Slider Bobbin (From racing-knightmotor on eBay. I’m sure I will not end up using all of the above hardware, but these will allow you to use a rear-wheel motorcycle stand) Rear Shock Hardware Honda BOLT, FLANGE (10X47) 90123-K26-900 Honda NUT, U (10MM) 90304-KGH-901 Air Filter K&N Vent Air Filter 62-1514 Carburetor Generic VM22 26mm from Amazon (Brand: LEIMO) 10pc Carburetor Main Jet for Mikuni VM22 from Amazon (Brand: ARJ) Spark Plug NGK CR7HIX Sprocket 428 17T Sprocket Front Engine Sprocket from Amazon Fender Eliminator Kemimoto Grom Fender Eliminator Kits from Amazon Exhaust MSX Motorcycle Exhaust Muffler Middle and Front Link Pipe Full System For Honda MSX 125 (From Amazon, but not currently available anymore. This is one of the only systems that fit the Grom clones because full Grom exhaust require you to bend the pipe to fit the exhaust port. This item is only the “header,” so you will still need to purchase a 38-51mm slip-on muffler of your choice) HIAORS Pit Dirt Bike Exhaust Crush Gasket from Amazon (These are needed when installing the midpipe listed above per multiple reviews) I still haven’t decided on a muffler yet! I like the look of the “shorty” carbon fiber ones, but not sure yet. Please post pics/suggestions to mufflers you all have found that sound and look badass! I look forward to being a part of the group! Thanks, Brian
	2

09-09-2021, 12:35 AM	#2
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,035	Welcome to here! Glad to see Pete has the Vaders back in stock and shipping __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

09-09-2021, 07:23 AM	#3
TyGuy Join Date: Jun 2021 Location: New Jersey Posts: 112	Welcome, and best of luck! Can't wait to see some photos! This looks like a fun list... __________________ -2021 Venom X22-GT -2021 Venom X22 -1910 Flying Merkel Board Track Racer Replica (self-built) IG: @TyGuyProductions
	0

11-17-2021, 01:51 PM	#4
Tundra210 Join Date: Nov 2021 Posts: 5	Hey how's the build going?
	0