Tao Tao Bull 150 Rear Brake spacers?

stuckiniowa · 12-16-2021, 03:03 PM

Friend wrecked back end of their Tao Tao Bull 150, I put a new axle housing on but I do not have the bolts or what I think should be spacers to mount the rear brake caliper on the axle housing. I was thinking about making my own but thought I would check if anyone knows where I could find some.

One website I know has some brake spacers, but the description calls out brake drums. Any help would be great.

https://partskit.com/products/brake-...40981132476623

https://partskit.com/products/brake-...40981080932559

david3921 · 12-16-2021, 11:31 PM

There aren't any spacers for the rear brake. I checked out my Rhino tonight (same rear set up as the Bull). It's attached to the housing with two bolts. The bolts are flanged.

Mudflap · 12-17-2021, 04:35 AM

My Rhino uses a flat washer as a spacer on each flanged bolt. The caliper has a piston on both sides of the disk so the pads self center.

12-16-2021, 03:03 PM	#1
stuckiniowa Join Date: Dec 2021 Posts: 1	Tao Tao Bull 150 Rear Brake spacers? Friend wrecked back end of their Tao Tao Bull 150, I put a new axle housing on but I do not have the bolts or what I think should be spacers to mount the rear brake caliper on the axle housing. I was thinking about making my own but thought I would check if anyone knows where I could find some. One website I know has some brake spacers, but the description calls out brake drums. Any help would be great. https://partskit.com/products/brake-...40981132476623 https://partskit.com/products/brake-...40981080932559
	0

12-16-2021, 11:31 PM	#2
david3921 Join Date: Feb 2009 Location: Michigan Posts: 1,032	There aren't any spacers for the rear brake. I checked out my Rhino tonight (same rear set up as the Bull). It's attached to the housing with two bolts. The bolts are flanged. __________________ 2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D
	0

12-17-2021, 04:35 AM	#3
Mudflap Join Date: Sep 2014 Posts: 1,885	My Rhino uses a flat washer as a spacer on each flanged bolt. The caliper has a piston on both sides of the disk so the pads self center.
	0