Templar X 250 - Page 45

Thumper · 09-08-2022, 09:40 AM

Quote:

Originally Posted by Thumper

Here it is. I've asked PSM if they can get this for us. See Nutcracker post #636 above!
Attachment 27475

Zora told me they don't have the RACK. I asked again, asked if they can contact Wuyi Zuma, order, stock them, and she responded this morning - Watch the PSM website for the appearance of the luggage rack as an accessory part for the Templar X.

tknj99 · 09-08-2022, 09:45 AM

Does anyone know how many chain links are required when running 13/42 and/or 14/42 or know how many links come stock. Want to change out the stock chain at some point.

chinazuki · 09-08-2022, 11:39 AM

missing bolt from axle caps (8.8 i think)..... and what might be speed sensor bolt

Should I just tell whoever has been emailing from PS, or look for a special link at at customer service?

I will buy that spannier pannier when it comes. Thanks for that

maybe a grouply purchase from alibaba ...

chinazuki · 09-08-2022, 04:13 PM

Quote:

Originally Posted by tknj99

For reference, this was the part # for the Xpro Titan when i had to change out the front bearings but not sure if they fit in the Templar wheel. The wheels do look very similar though:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

taper bearings in 22 templar x (my box of parts)
I might have also torn a seal pounding it together

chinazuki · 09-08-2022, 05:33 PM

Front brake. Is that also needing attention?

No movement, hand feeling the caliper.

templar hydraulics

AjjAxx84 · 09-08-2022, 06:56 PM

Quote:

Originally Posted by chinazuki

Front brake. Is that also needing attention?

No movement, hand feeling the caliper.

templar hydraulics

Just email zora. I had shipping damage and after 100 miles I had an issue with my engine. PSM sent me all the replacement parts I needed and a replacement engine.

Thumper · 09-08-2022, 08:32 PM

Quote:

Originally Posted by chinazuki

Front brake. Is that also needing attention?

No movement, hand feeling the caliper.

templar hydraulics

Whoa, whoa, whoa...Wait a minute.

I noticed dry caliper on mine.

Before you panic, get it all together, add fluid in the reservoir on the handlebars, and begin the bleed. No problem with the hardware...

chinazuki · 09-08-2022, 09:39 PM

you were right...took me long enough, I emptied that tiny rez three times sucking air
....but it required mighty-vac, to get any pressure

Blueridge boyieee · 09-09-2022, 06:25 AM

Quote:

Originally Posted by AjjAxx84

Powersportsmax - service@maxpro-llc.com

Thanks!

Blueridge boyieee · 09-09-2022, 06:48 AM

Quote:

Originally Posted by tknj99

Is anyone lock-tighting the rear axle nut? I had the axle nuts loosen up on my Titan and had to drill holes in them to use a cotter pin as a safety measure. I know that the front axle has the 4 pinch bolts so that is a safety measure there but the rear doesn't and im skeptical. thanks

Think I remember reading about your snag in the Titan thread. I’ve had the rear wheel off many times and double check axel torque before riding, thanks. I’ve never found it loosened up but I always use a bit of blue loctite.

On the base model, there are no pinch bolts on the front axel, so that gets a pre ride check too. Lots of smart people on here, sharing. Good times.

Blueridge boyieee · 09-09-2022, 07:01 AM

Quote:

Originally Posted by chinazuki

Fuel injection should be better but is it ?
Are there other problems beside cost with the FI?

thank you

Not wanting to turn this into a injection v carb thread. But IMO the best part of these bikes is the simplicity. One line and one bolt and the tank is off for service. And the factory installed carb is a polished smooth bore, with lots of pics in this thread.

KISS matters most to me in this category of low cost enduros.

Blueridge boyieee · 09-09-2022, 07:05 AM

Quote:

Originally Posted by tknj99

Does anyone know how many chain links are required when running 13/42 and/or 14/42 or know how many links come stock. Want to change out the stock chain at some point.

I used a 112 link RK chain and removed two links. The 110 works for me with 13/42 or 14/42.

JRust · 09-09-2022, 08:56 AM

Since the speedometer sensor is located on the front wheel, does that mean that changing the sprockets will not affect speedometer accuracy or odometer?

IA_Grvlrnr · 09-09-2022, 05:46 PM

Not sure if this will be helpful/useful but I see many questions about air filter cross references... I have been poking around trying to figure out what seat was copied for the Templar X. There was a clue I missed way earlier in the 1st post by ExMxer. Along the way recently, I stumbled on photos that make me think it uses the exact same seat pan as the 07-09 Suzuki RMZ250. Might try snagging a beat up used one cheap on ebay to confirm.. Anyway, While looking into this it also looks like the airbox\filter are the same and maybe some other body parts, tank? & possibly handlebar controls\levers?... I came back here and did a site search for RMZ references and it was in very 1st post of this thread

"...The Suzuki style shrouds on the tank scream second generation RMZ 250..."

Thumper · 09-10-2022, 02:11 PM

Quote:

Originally Posted by JRust

Since the speedometer sensor is located on the front wheel, does that mean that changing the sprockets will not affect speedometer accuracy or odometer?

You are correct. The gearing on the rear drive won't affect the speedo.

09-08-2022, 09:45 AM	#662
tknj99 Join Date: Oct 2020 Location: Central VA Posts: 1,258	Does anyone know how many chain links are required when running 13/42 and/or 14/42 or know how many links come stock. Want to change out the stock chain at some point. __________________ 2024 Zuma Storm 150 DLX 2019 Beta 430 RRS 2018 VStrom 1000 XT Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X
	0

09-08-2022, 11:39 AM	#663
chinazuki Join Date: Sep 2022 Location: arkansas Posts: 43	missing bolt from axle caps (8.8 i think)..... and what might be speed sensor bolt Should I just tell whoever has been emailing from PS, or look for a special link at at customer service? I will buy that spannier pannier when it comes. Thanks for that maybe a grouply purchase from alibaba ... __________________ arkansas
	0

09-08-2022, 05:33 PM	#665
chinazuki Join Date: Sep 2022 Location: arkansas Posts: 43	Front brake. Is that also needing attention? No movement, hand feeling the caliper. templar hydraulics __________________ arkansas
	0

09-08-2022, 09:39 PM	#668
chinazuki Join Date: Sep 2022 Location: arkansas Posts: 43	front brake you were right...took me long enough, I emptied that tiny rez three times sucking air ....but it required mighty-vac, to get any pressure __________________ arkansas
	0

09-09-2022, 08:56 AM	#673
JRust Join Date: Aug 2022 Posts: 20	Since the speedometer sensor is located on the front wheel, does that mean that changing the sprockets will not affect speedometer accuracy or odometer?
	1

09-09-2022, 05:46 PM	#674
IA_Grvlrnr Join Date: Sep 2022 Location: Lisbon, IA Posts: 24	Not sure if this will be helpful/useful but I see many questions about air filter cross references... I have been poking around trying to figure out what seat was copied for the Templar X. There was a clue I missed way earlier in the 1st post by ExMxer. Along the way recently, I stumbled on photos that make me think it uses the exact same seat pan as the 07-09 Suzuki RMZ250. Might try snagging a beat up used one cheap on ebay to confirm.. Anyway, While looking into this it also looks like the airbox\filter are the same and maybe some other body parts, tank? & possibly handlebar controls\levers?... I came back here and did a site search for RMZ references and it was in very 1st post of this thread "...The Suzuki style shrouds on the tank scream second generation RMZ 250..."
	2