Cyclewerks Heist (need some help sourcing parts)

98 SNAKE EATER · 02-16-2023, 03:16 AM

Recently picked up this little project and looking for some direction

It's a Cleveland Cyclewerks Heist

From what I've read, the company is defunct, but their web page is still active (been trying to contact them with no response)

https://www.clevelandcyclewerks.com/heist-gen-1

Motor has compression and the PO claims it was running fine until the wiring got kinked in the fork and shorted out

It appears to be a rebranded Lifan (RHON) 200/250cc

Trying to weigh my options to see which direction I really wanna go with this

I've seen plenty of wiring kits available, but not sure which one is compatible with this motor....

Needs a few odds and ends (foot peg, hand throttle, kick start lever, battery, tank, etc, etc.)

If I can get it up and running on a cheap, that would be great, but I'm also considering doing a full electric conversion like this....

**JerryHawk250** · 02-16-2023, 07:48 AM

Cool looking bike. Looks to be a typical counterbalance CG250 engine. You could source a good bit of the parts you need from the Brozz250. https://shop.brozz250.com/eshopdetai...rozz_Parts.htm

98 SNAKE EATER · 02-19-2023, 09:43 AM

Thanks for the info

Contacted a few vendors and they all say their wiring harnesses are compatible, but I need to confirm if it has a two or three hole stator

If worse comes to worse and it needs a motor, what are my uptions for upgrades?

Will a 300cc or bigger bolt in without modifcation?

02-16-2023, 03:16 AM	#1
98 SNAKE EATER Join Date: Feb 2023 Location: Southampton, NY Posts: 72	Cyclewerks Heist (need some help sourcing parts) Recently picked up this little project and looking for some direction It's a Cleveland Cyclewerks Heist From what I've read, the company is defunct, but their web page is still active (been trying to contact them with no response) https://www.clevelandcyclewerks.com/heist-gen-1 Motor has compression and the PO claims it was running fine until the wiring got kinked in the fork and shorted out It appears to be a rebranded Lifan (RHON) 200/250cc Trying to weigh my options to see which direction I really wanna go with this I've seen plenty of wiring kits available, but not sure which one is compatible with this motor.... Needs a few odds and ends (foot peg, hand throttle, kick start lever, battery, tank, etc, etc.) If I can get it up and running on a cheap, that would be great, but I'm also considering doing a full electric conversion like this....
	0

02-16-2023, 07:48 AM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,571	Cool looking bike. Looks to be a typical counterbalance CG250 engine. You could source a good bit of the parts you need from the Brozz250. https://shop.brozz250.com/eshopdetai...rozz_Parts.htm __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

02-19-2023, 09:43 AM	#3
98 SNAKE EATER Join Date: Feb 2023 Location: Southampton, NY Posts: 72	Thanks for the info Contacted a few vendors and they all say their wiring harnesses are compatible, but I need to confirm if it has a two or three hole stator If worse comes to worse and it needs a motor, what are my uptions for upgrades? Will a 300cc or bigger bolt in without modifcation?
	0