Zongshen ZS250GS Winner NO SPARK

*hpdesign · 05-20-2015, 11:55 PM

OK so, sorry if this has been done to death, I am brand new here and just on my first Chinese bike. Seems no to be going well.

Bought a 2006 model with 3000kms on it not running, but all together.... the guy who sold it to me said he replaced the CDI and it didn't work so he gave up but after taking the fairings off and peeling some tape off the loom he had butchered the loom, I had a play with it but without a proper wiring diagram and all of the components being a suspect or likley candidate I looked online for spare parts.

Astounded as to how little their is for support in Australia, I spoke to someone who said he had a spare loom for a 250 Zongshen motor. sent it to me and got most of the way of the old loom an dwent to replace the magneto and stator and he's given me an 11 pole magneto, where mine had an 18 pole 3 phase, at this point the spare parts guy didn't want to know me.

I have the new loom connected and the old recifier piggy backed, however the CDI for the 11 pole has what appears to be inputs from the magneto that I can't seem to combine.

The other option is to check the stator and magneto are ok before I put the old loom back in but I don't know if I can visually they are fine, but have oil over them. I think they are meant to be wet though, but I don't know if I can test them.

Can someone help me it's a 172FMM motor with a 18 pole stator I have found a replacement part on AliExpress that in the picture looks identical, but I don't want to wait the few weeks to work out its not them or better still the part is different than pictured.

Sorry for the essay, but thanks for any assistance

05-20-2015, 11:55 PM	#1
*hpdesign Join Date: May 2015 Posts: 5	Zongshen ZS250GS Winner NO SPARK OK so, sorry if this has been done to death, I am brand new here and just on my first Chinese bike. Seems no to be going well. Bought a 2006 model with 3000kms on it not running, but all together.... the guy who sold it to me said he replaced the CDI and it didn't work so he gave up but after taking the fairings off and peeling some tape off the loom he had butchered the loom, I had a play with it but without a proper wiring diagram and all of the components being a suspect or likley candidate I looked online for spare parts. Astounded as to how little their is for support in Australia, I spoke to someone who said he had a spare loom for a 250 Zongshen motor. sent it to me and got most of the way of the old loom an dwent to replace the magneto and stator and he's given me an 11 pole magneto, where mine had an 18 pole 3 phase, at this point the spare parts guy didn't want to know me. I have the new loom connected and the old recifier piggy backed, however the CDI for the 11 pole has what appears to be inputs from the magneto that I can't seem to combine. The other option is to check the stator and magneto are ok before I put the old loom back in but I don't know if I can visually they are fine, but have oil over them. I think they are meant to be wet though, but I don't know if I can test them. Can someone help me it's a 172FMM motor with a 18 pole stator I have found a replacement part on AliExpress that in the picture looks identical, but I don't want to wait the few weeks to work out its not them or better still the part is different than pictured. Sorry for the essay, but thanks for any assistance
	0