Rare Sprocket bolts

Yung00 · 05-17-2020, 11:43 PM

What’s up guys so today I was changing my back sprocket when two of the bolts wanted to not turn so basically they got stripped. I already got new bolts but this really sucked. so have anyone ran into it this problem?

Megadan · 05-18-2020, 12:02 AM

Quote:

Originally Posted by Yung00

What’s up guys so today I was changing my back sprocket when two of the bolts wanted to not turn so basically they got stripped. I already got new bolts but this really sucked. so have anyone ran into it this problem?

More than a few people have had that issue. The fasteners on the cheaper bikes are made out of cheese. A lot of the hardware on my bike has been changed out to either OEM Honda parts, or fasteners that are actually graded as 10.9 Metric.

Yung00 · 05-18-2020, 07:06 PM

I noticed that and I think I may have to buy either a new back tire if I don’t get lucky to get the two that strip very very badly off. I think I’m gonna replace most of the nuts and bolts also.

humanbeing · 05-18-2020, 11:36 PM

Quote:

Originally Posted by Megadan

More than a few people have had that issue. The fasteners on the cheaper bikes are made out of cheese...

Chinese parts house stocks the upgrade version for the same reason

Digger · 05-19-2020, 06:39 AM

I upgraded to genuine Honda sprocket hardware including the Honda sprocket retaining snap ring.
Much better fit...well worth the 40$

Yung00 · 05-21-2020, 06:45 PM

Where can I get the upgrade bolts and nuts from ?

Megadan · 05-21-2020, 07:14 PM

Quote:

Originally Posted by Yung00

Where can I get the upgrade bolts and nuts from ?

Quite literally the second link in my signature. Second post. Second Paragraph, Part number is in bold lol. This number, to be specific. 90128-ke2-940

http://www.chinariders.net/showpost....70&postcount=2

Pick up some metric serrated flange nuts or nylock nuts with a washer, grade 10.9 or better, from a hardware store. Problem solved.

RedCrowRides · 05-21-2020, 07:46 PM

Does this mean i need to stop calling their hardware " Chinesium" and start using " Chicheesium "?

Yung00 · 05-22-2020, 07:14 AM

Ok thanks Dan and I already have your upgrade page saved super helpful

Kenstogie · 05-22-2020, 09:42 AM

Quote:

Originally Posted by megadan

made out of cheese.

Quote:

Originally Posted by redcrowrides

chinesium

😂😂

bogieboy · 05-22-2020, 11:02 AM

Quote:

Originally Posted by Megadan

More than a few people have had that issue. The fasteners on the cheaper bikes are made out of cheese. A lot of the hardware on my bike has been changed out to either OEM Honda parts, or fasteners that are actually graded as 10.9 Metric.

dont insult our member Cheesy like that.... LOL

05-21-2020, 07:46 PM	#8
RedCrowRides Join Date: Jun 2018 Location: Florida Posts: 759	Does this mean i need to stop calling their hardware " Chinesium" and start using " Chicheesium "? __________________ 2001 Mustang GT 2004 Sportster 2018 VADER 2020 Orion RXB250L
	3

05-18-2020, 07:06 PM	#3
Yung00 Join Date: Apr 2020 Location: Douglasville, Ga Posts: 25	I noticed that and I think I may have to buy either a new back tire if I don’t get lucky to get the two that strip very very badly off. I think I’m gonna replace most of the nuts and bolts also.
	0

05-19-2020, 06:39 AM	#5
Digger Join Date: Jul 2018 Posts: 64	I upgraded to genuine Honda sprocket hardware including the Honda sprocket retaining snap ring. Much better fit...well worth the 40$
	1

05-21-2020, 06:45 PM	#6
Yung00 Join Date: Apr 2020 Location: Douglasville, Ga Posts: 25	Where can I get the upgrade bolts and nuts from ?
	0

05-22-2020, 07:14 AM	#9
Yung00 Join Date: Apr 2020 Location: Douglasville, Ga Posts: 25	Ok thanks Dan and I already have your upgrade page saved super helpful
	0