Shifter Oil Leak - Hawk 250

UStateLefty · 11-11-2016, 03:18 PM

I tried searching but I couldn't find the answer to this. Can anybody enlighten me on where to get a replacement o-ring?

chuck · 11-11-2016, 03:41 PM

Quote:

Originally Posted by UStateLefty

I tried searching but I couldn't find the answer to this. Can anybody enlighten me on where to get a replacement o-ring?

I will bet you that every Hawk have that leak it just not everyone noticed it yet.After a nice run I touch the bottom of the engine and there is always a little bit of oil around the shifter.The good thing is it does stop when the engine cools down a bit.I'm not concerned because it's not enough to cause any problems.

Mudflap · 11-11-2016, 03:50 PM

Lean bike over on the right side so the oil won't come out. Remove shift lever. Use a small screwdriver to remove seal. Take to your local bearing shop to get a new one. Probably a 14/28/7. Reassemble in reverse order.

UStateLefty · 11-11-2016, 06:16 PM

Quote:

Originally Posted by chuck

I will bet you that every Hawk have that leak it just not everyone noticed it yet.After a nice run I touch the bottom of the engine and there is always a little bit of oil around the shifter.The good thing is it does stop when the engine cools down a bit.I'm not concerned because it's not enough to cause any problems.

I wouldn't be concerned except that after I wipe it off it continues to slowly drip on the floor and doesn't ever stop.

chuck · 11-11-2016, 06:35 PM

Ok, that is bad.

Ariel Red Hunter · 11-11-2016, 07:11 PM

Quote:

Originally Posted by UStateLefty

I wouldn't be concerned except that after I wipe it off it continues to slowly drip on the floor and doesn't ever stop.

Mudflap has a pretty good answer to your problem.

Mudflap · 11-12-2016, 05:33 AM

Yup, it's a 5 minute job. Why put up with a leak?

Quote:

Originally Posted by Ariel Red Hunter

Mudflap has a pretty good answer to your problem.

UStateLefty · 07-03-2017, 01:59 PM

I forgot to post that I couldn't find the part locally so I had to order a oil seal off eBay the size needed is 14x28x7

Sir kayakalot · 07-03-2017, 03:47 PM

Thanks for the follow up. Mine doesn't leak, but if it ever does at least I know which seal to get

**JerryHawk250** · 07-03-2017, 03:50 PM

Quote:

Originally Posted by Sir kayakalot

Thanks for the follow up. Mine doesn't leak, but if it ever does at least I know which seal to get

Yep, I already got it written down in my little book along with the Honda 17211-ZL8-023 air filter, ect.

ricardoguitars · 07-03-2017, 04:41 PM

Mine is leaking, I thought it was leaking from one of the case bolts, now I know where the leak comes from

11-11-2016, 03:18 PM	#1
UStateLefty Join Date: Oct 2016 Posts: 14	Shifter Oil Leak - Hawk 250 I tried searching but I couldn't find the answer to this. Can anybody enlighten me on where to get a replacement o-ring?
	0

07-03-2017, 03:47 PM	#9
Sir kayakalot Join Date: Dec 2016 Posts: 269	Thanks for the follow up. Mine doesn't leak, but if it ever does at least I know which seal to get __________________ Hawk 250 Mikuni carb 115 main. De-catted pipe. Air box mod. 15/42 sprockets. Digital instrument cluster, FMF end cap on muffler, handlebar toolbag, Custom foot pegs
	1

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-11-2016, 03:50 PM	#3
Mudflap Join Date: Sep 2014 Posts: 1,961	Lean bike over on the right side so the oil won't come out. Remove shift lever. Use a small screwdriver to remove seal. Take to your local bearing shop to get a new one. Probably a 14/28/7. Reassemble in reverse order.
	4

11-11-2016, 06:35 PM	#5
chuck Join Date: Sep 2015 Posts: 436	Ok, that is bad.
	0

07-03-2017, 01:59 PM	#8
UStateLefty Join Date: Oct 2016 Posts: 14	I forgot to post that I couldn't find the part locally so I had to order a oil seal off eBay the size needed is 14x28x7
	0

07-03-2017, 04:41 PM	#11
ricardoguitars Join Date: Jun 2016 Location: Costa Rica Posts: 82	Mine is leaking, I thought it was leaking from one of the case bolts, now I know where the leak comes from
	0