Clutch and Brake Levers

kirbo7106 · 10-30-2017, 11:42 AM

I finally got around to installing my clutch and brake levers this past weekend. I ordered these off eBay after my Hawk got knocked over and broke the clutch lever. They fit the Honda CB 500. The brake lever fit perfectly, but the clutch lever required a little sanding/filing. The lever was a little too thick for the bracket.I used a little sanding wheel on my Big Lots “Dremel” tool. It took about 10 minutes to sand it down to the correct thickness.
Name: C70E9CCD-3869-4B20-BECE-BAD6F7F28C5E.jpg
Views: 443
Size: 18.9 KB

Name: C70E9CCD-3869-4B20-BECE-BAD6F7F28C5E.jpg
Views: 443
Size: 18.9 KB

Name: B71BBAAA-452E-49FD-986A-0AA7B529C54F.jpg
Views: 443
Size: 19.8 KB

10-30-2017, 11:42 AM	#1
kirbo7106 Join Date: Feb 2017 Location: Holiday, Florida Posts: 672	Clutch and Brake Levers I finally got around to installing my clutch and brake levers this past weekend. I ordered these off eBay after my Hawk got knocked over and broke the clutch lever. They fit the Honda CB 500. The brake lever fit perfectly, but the clutch lever required a little sanding/filing. The lever was a little too thick for the bracket.I used a little sanding wheel on my Big Lots “Dremel” tool. It took about 10 minutes to sand it down to the correct thickness. __________________ Dan-O -2018 Tao Tao HellCat - DOA -2016 Hawk 250 - Kitty Hawk - eBay exhaust, Mikuni carb(120 main/30 Pilot), airbox mod with K&N filter, digital cluster, total LEDs, 17/45 sprockets, RK chain, Shinko 244 tires, trunk, aftermarket levers, burrito tube, skid plate, Sargent Cycle Seat... -2003 HD Sportster 100th Anniversary -1999 Buell X-1 Lightning - Race kit, Buell Seat
	3