Different Sprockets for a GY 200

Josh_smith91 · 07-10-2011, 01:14 PM

got a gy 200 and the sprocket on there has 56 teeth. i think its the original sprocket but any ways on the backside of it there is a groove cut in it to so the studs that go through can sit in it but the groove isnt a big deal. so what im wondering is there any sprockets out there that that have the same diameter as that center hole

ejcycles · 07-12-2011, 01:32 PM

Call me & let me know what you are wanting to do, more speed ? etc. I have sprockets in stock.

As long as the rear is a 4 bolt.

katoranger · 07-12-2011, 08:34 PM

Bruce is the MAN to call.

sallzy · 07-16-2011, 08:16 AM

+1 for Bruce. He hooked me up and now my shine runs sweet. No more over revving at 50 mph. Def give him a call.

07-10-2011, 01:14 PM	#1
Josh_smith91 Join Date: Jul 2011 Posts: 23	Different Sprockets for a GY 200 got a gy 200 and the sprocket on there has 56 teeth. i think its the original sprocket but any ways on the backside of it there is a groove cut in it to so the studs that go through can sit in it but the groove isnt a big deal. so what im wondering is there any sprockets out there that that have the same diameter as that center hole
	0

07-12-2011, 01:32 PM	#2
ejcycles Join Date: Oct 2006 Location: 11481 State Route 44 Mantua, Ohio 44255 Posts: 1,112	Call me & let me know what you are wanting to do, more speed ? etc. I have sprockets in stock. As long as the rear is a 4 bolt. __________________ Thanks, Bruce @ Endless Journey Cycles "Phone Calls Only" ~330-274-0098~ Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST. Dealer for: Lifan, Crossrunner ATVs. http://www.endlessjourneycycles.net
	0

07-12-2011, 08:34 PM	#3
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Bruce is the MAN to call.
	0

07-16-2011, 08:16 AM	#4
sallzy Join Date: Aug 2010 Location: Hyde park vermont Posts: 61	+1 for Bruce. He hooked me up and now my shine runs sweet. No more over revving at 50 mph. Def give him a call.
	0