07-22-2011, 08:54 PM | #1 |
Join Date: Jul 2011
Posts: 23
|
turn signals on gy200
The turn signals come on but at low rpm's they stay steady but when i rev it up they start flashing
|
|
07-22-2011, 10:07 PM | #2 |
Join Date: Oct 2009
Location: Alberta, Canada
Posts: 3,274
|
Sounds like they're not getting enough juice to flash unless you have the engine revved up... Is the battery charged and working ok?
|
|
07-23-2011, 11:51 AM | #3 |
Join Date: Jul 2011
Posts: 23
|
well me n my dad tore into it and turns out the flashing unit under the seat was a little funky i sprayed with electronics cleaner and but a piece of duct tape on the bottom of the circuit board where all the pins are soldered and they work like a champ now.......thanks for your response tho.......much appreciated
|
|
07-23-2011, 11:58 AM | #4 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
I'm glad to hear you solved the problem, Josh! Thanks for post the update.
Spud
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
07-24-2011, 02:28 AM | #5 |
Join Date: Jul 2011
Posts: 23
|
well heres another update me n a bunch of other buddys were out riding and idk if it was just irony but we hit a light patch of rain and ever since the rain they stopped coming on all together......i ordered a new flasher though tonight, but tomorrow i will tear into it again and see whats up with it again and ill post again with what i come up with
|
|
|
|
|
|