06-04-2007, 12:28 AM | #16 |
Join Date: Jul 2006
Location: Fresno, CA.
Posts: 45
|
Found a good picture that I could read the model number. It says model 3.00 so I assume that it was the 3" universal model. I'm not sure that that makes much difference because I cut mine at the narrowest part of the neck down area to fit the collar on the exhaust pipe, and discarded the clamp section anyway. As I recall it wasn't a real tight fit, but it worked. I haven't had any problems and with the screws I don't have to worry about it vibrating loose and losing it on a trail.
I have forgotten how to add pictures to my gallery so I will keep working on it and try to get one posted.
__________________
2006 Jetmoto TT200GY 2000 Suzuki VS800GL |
|
06-04-2007, 01:12 AM | #17 |
Join Date: Mar 2007
Location: Abbotsford, BC, Canada
Posts: 4,880
|
Ok sounds good motoman, I will just have to measue my pipe... and then see if I can find a good deal, 80 bucks is still more then I want to spend
|
|
06-06-2007, 08:25 PM | #18 |
Join Date: Jul 2006
Location: Fresno, CA.
Posts: 45
|
This is a picture of the installation on my go kart, but I did the same thing to fit the "Sparkey" to my Jetmoto bike. They say a picture is worth a 1000 words. Hope this helps.
[/img]
__________________
2006 Jetmoto TT200GY 2000 Suzuki VS800GL |
|
06-06-2007, 10:06 PM | #19 |
Join Date: Mar 2007
Location: Abbotsford, BC, Canada
Posts: 4,880
|
Looks good, thanks
|
|
|
|
|
|