11-18-2015, 02:06 PM | #1 |
Join Date: Apr 2012
Posts: 36
|
Brake rod and camshaft lever
My brake rod came loose from the camshaft lever and wrapped all around my brake drum. Also the bar that connects from under the brake pedal to the brake drum broke off as well. I am trying to find the parts to replace these from Honda or Yamaha and was wondering if anyone would know where to start. The bike is a Zong GY 200, labelled as a KPX GY200.
|
|
11-18-2015, 02:09 PM | #2 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
If you have time, please post a photo of your bike, and the damaged parts. I believe your KPX GY200 is a Hondoid.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
11-18-2015, 03:11 PM | #3 |
Join Date: Apr 2012
Posts: 36
|
here are a few pics of the bike and parts
|
|
11-18-2015, 11:12 PM | #4 |
Join Date: Jul 2010
Posts: 206
|
You might be able to make the black part from a flat, thick piece of steel. Home Depot sells a bit of a selection of these. I found them when I bought the parts to make a tool for holding the front belt pulley etc on a scooter. You'd want a fairly thick piece so it doesn't flex. Maybe like 1/4" or 3/8" thick? Drill holes in the right spots.
__________________
Jon, in Keaau, Hawaii |
|
|
|
|
|