03-31-2016, 10:25 PM | #1 |
Join Date: Jun 2015
Location: Missouri USA
Posts: 164
|
Upgrading my Hawk
Starting my upgrade and spring maintenance . I will keep y'all updated. Here's the list:
new longer shifter oil cooler street tires / shinko 705 sprockets 17/43 new chain changing fork oil new paint job engine oil change new rear rack |
|
03-31-2016, 10:29 PM | #2 |
Join Date: Jun 2015
Location: Missouri USA
Posts: 164
|
Pics of stripped bike
|
|
04-02-2016, 04:57 PM | #4 |
Join Date: Jun 2015
Location: Missouri USA
Posts: 164
|
Got most of the changes done today. Still waiting for the oil cooler which is on its way from China. The longer shifter is a great upgrade which all Hawk owners should consider getting. Top speed now with the sprocket change was 63. However I did not have it full open and there is a 10-15 mph cross/head wind.
|
|
04-02-2016, 05:22 PM | #5 | |
Join Date: Aug 2013
Location: South Carolina
Posts: 8
|
Quote:
|
|
|
04-02-2016, 06:33 PM | #6 |
Join Date: Jun 2015
Location: Missouri USA
Posts: 164
|
|
|
04-02-2016, 06:35 PM | #7 |
Join Date: Jun 2015
Location: Missouri USA
Posts: 164
|
My speedometer
|
|
04-02-2016, 06:43 PM | #9 |
Join Date: Jun 2015
Location: Missouri USA
Posts: 164
|
The new tires ride much better on the road. As for the 17/43 sprocket ratio I don't think it makes it much better than the 17/45. I did have to do a little bit of grinding and sanding on the cover around the front sprocket to make clearance for the chain. I also opted to leave the front fender off for now as I'm not for sure that it will clear the oil cooler. Might have to figure something out on that.... Decided to go bi-tone on color. The plastics on the fender, around the light, over the exhaust, and behind the seat are all black; while the side panels are orange. Just to clarify what plastics are what.
|
|
04-02-2016, 06:56 PM | #10 | |
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
|
Quote:
__________________
***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
|
|
|
04-02-2016, 07:04 PM | #11 |
Join Date: Jun 2015
Location: Missouri USA
Posts: 164
|
I might get some spacers and drop the fender closer to tire so there's more room between it and the frame
|
|
04-02-2016, 07:05 PM | #12 |
Join Date: Mar 2016
Location: Houston texas westside
Posts: 40
|
still looks like you got about a inch and a half of fork to push down.
|
|
04-02-2016, 07:07 PM | #13 |
Join Date: Jun 2015
Location: Missouri USA
Posts: 164
|
Nope. it's 7/8
|
|
|
|
|
|