What's your hawk idling at with the mikuni?

xposur · 06-13-2016, 10:09 PM

I use to idle 1500-1600 on the stock carb. With the mikuni I can't get a steady idle lower than 1800, bike seam happy at around 1900-2000. At 1800 it dies occationally.

Weldangrind · 06-14-2016, 12:45 PM

Sounds like your slow jet might be a tad too small.

Sport Rider · 06-14-2016, 12:46 PM

mine is around 1600. what's your jetting?

xposur · 06-14-2016, 11:20 PM

32.5 pilot

Sport Rider · 06-15-2016, 10:10 AM

that's larger than most of us run. I have a 30 in mine with the pilot at 1.33 turns. I have a 27.5 that I'm going to try next. I would try the 30 with the screw at 1.5 turns and adjust from there.

xposur · 06-16-2016, 09:50 AM

Quote:

Originally Posted by Sport Rider

that's larger than most of us run. I have a 30 in mine with the pilot at 1.33 turns. I have a 27.5 that I'm going to try next. I would try the 30 with the screw at 1.5 turns and adjust from there.

I have 2 hawks, my black one has a decat and im running a 32.5, it idles good but a little higher, I'm going to try a 35 in it.

my blue one is stock. Had the 25 in there and it was idling at 1800-2000 but dying with the idle dropping a little towards 1500. I swaped it to a 27.5 and it was dying less frequently. Swapped it to a 30 and it was dying more frequently. Didnt get a change to adjust anything with the pilot and idle screws.

06-13-2016, 10:09 PM	#1
xposur Join Date: Jun 2015 Location: Des Plaines, IL Posts: 85	What's your hawk idling at with the mikuni? I use to idle 1500-1600 on the stock carb. With the mikuni I can't get a steady idle lower than 1800, bike seam happy at around 1900-2000. At 1800 it dies occationally.
	0

06-14-2016, 12:45 PM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Sounds like your slow jet might be a tad too small. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

06-14-2016, 12:46 PM	#3
Sport Rider Join Date: Jan 2016 Location: Mooresville NC Posts: 2,149	mine is around 1600. what's your jetting?
	0

06-14-2016, 11:20 PM	#4
xposur Join Date: Jun 2015 Location: Des Plaines, IL Posts: 85	32.5 pilot
	0

06-15-2016, 10:10 AM	#5
Sport Rider Join Date: Jan 2016 Location: Mooresville NC Posts: 2,149	that's larger than most of us run. I have a 30 in mine with the pilot at 1.33 turns. I have a 27.5 that I'm going to try next. I would try the 30 with the screw at 1.5 turns and adjust from there.
	0