06-04-2016, 01:47 AM
|
#93 |
Join Date: Mar 2008
Posts: 2,436
|
轴套 collar |线 wire 长 length |接插器 connector |脉冲 pulse 信号 signal |油 oil 封seal 尺寸size| ** 类 Type 内in 正normal 外out 唇囗 lip| 备注 remark
__________________
|
|
|
06-04-2016, 08:56 PM
|
#96 | |
Join Date: Dec 2015
Location: Coastal NC
Posts: 537
|
Quote:
__________________
-whatever you do, just be awesome. - 2008 Kawasaki Versys - 2016 CSC TT250 |
|
|
|
|
06-04-2016, 09:33 PM
|
#97 |
|
Join Date: Dec 2015
Location: Coastal NC
Posts: 537
|
didn't have the rest written down so i had to roll the bike into the garage through the people door and pull the wheel again (did i mention how easy that is to do?)
 
__________________
-whatever you do, just be awesome. - 2008 Kawasaki Versys - 2016 CSC TT250 |
|
|
|
06-06-2016, 10:32 AM
|
#98 |
|
Join Date: May 2007
Location: Lac Du Flambeau, WI
Posts: 804
|
Kohburn, Sorry to be a burr under your saddle but the TT guys will love you for it.
"Our existing axle copper bush height is 24.00mm, but we can change from 24.00mm to 29.5mm according to your TT 250 sensor, and it takes about 2-3 days, if you can accept 24.00mm height, then we can send our existing sensor with 24.00 mm height right now. Please let us know your decisions. Please see the detailed size difference. our size is marked yellow color after your number. we guess the difference is just measures tolerance between you and me." |
|
|
|
06-06-2016, 12:19 PM
|
#99 |
|
Join Date: Dec 2015
Location: Coastal NC
Posts: 537
|
The rib on the casting is not critical. All of those dimensions should work fine except the bushing height. 5-6mm is a pretty big difference. I would have to shim it with washers.
if you want me to test fit one then just have them send the one as is. I can use a $0.60 bronze thrust bushing or a couple stainless washers to space it out. would hate for you to get a bunch and have them not fit properly.
__________________
-whatever you do, just be awesome. - 2008 Kawasaki Versys - 2016 CSC TT250 |
|
|
|
06-06-2016, 07:16 PM
|
#100 |
Join Date: Apr 2016
Posts: 311
|
You guys rock!
__________________
2016 CSC TT250 |
|
|
|
06-06-2016, 10:42 PM
|
#101 | |
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
|
Quote:
__________________
************************************************** *** " Time you enjoy wasting, is not wasted." - John Lennon  “I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.” ― Thomas Jefferson "If you don't know where you're going any road will take you there" ....George Harrison song |
|
|
|
|
06-27-2016, 07:40 AM
|
#103 |
|
Join Date: May 2016
Location: Kansas
Posts: 31
|
I was amazed at how easy this cluster is to install. Big thumbs up to mjstef for making this truly plug and play. I only bought this because my speedo cable snapped internally and after riding on this for a couple days I cant imagine going back. This is a much nicer cluster than stock and gives you all the feedback you need. I do plan on replacing the clamp on connector to the tach at somepoint, but its solid for now. I also really like having the gear indicator. Also my total time from walking in the garage to test ride was less than an hour! Great mod.
|
|
|
|
06-27-2016, 08:09 AM
|
#104 | |
|
Join Date: Dec 2015
Location: Coastal NC
Posts: 537
|
Quote:
__________________
-whatever you do, just be awesome. - 2008 Kawasaki Versys - 2016 CSC TT250 |
|
|
|
|
|
|
 |
|
|
Linear Mode
