Rhino Rear End Problems Need Help and Warning

Speckred17 · 07-25-2016, 04:41 PM

I will try to get pics posted tonight. It is real hard to explain in words. Basically the adjuster screws into the axle housing and that bolt was missing. I went to replace the bolt and the "gap" would not line up with the threaded hole on the sway bar. Then I noticed the bolt on the top that connects the top of the axle housing to the sway bar was missing. I took the bolt off the other side to be sure I had the right size and the axle housing rotated down towards me. Now I can't seem to rotate the housing back up to line up the holes for the bolt. I will take pictures and point to the areas I am talking about.

07-25-2016, 04:41 PM	#1
Speckred17 Join Date: Feb 2016 Posts: 47	I will try to get pics posted tonight. It is real hard to explain in words. Basically the adjuster screws into the axle housing and that bolt was missing. I went to replace the bolt and the "gap" would not line up with the threaded hole on the sway bar. Then I noticed the bolt on the top that connects the top of the axle housing to the sway bar was missing. I took the bolt off the other side to be sure I had the right size and the axle housing rotated down towards me. Now I can't seem to rotate the housing back up to line up the holes for the bolt. I will take pictures and point to the areas I am talking about.
	1