02-11-2018, 06:25 AM | #1 |
Join Date: Feb 2018
Posts: 3
|
Electrical Problems
Guys I need your help, I cant seem to find the correct wiring diagram for my Loncin 250 ,I have the electronics below on my bike, but it just doesnt want to start, any help would be much appreciated.
|
|
02-11-2018, 05:18 PM | #2 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
Going to need more info.
What makes you think its an electrical problem? And really there is only one answer to this and that is 'no spark at the plug'. If there is no spark at the plug the first thing I check is the kill switch and then all the safety switches. Both brakes, kick stand, neutral etc. Then I would check to verify no spark when using electric start and no spark when kick starting. Now you have confirmed an actual problem. Start at the spark plug and test the wiring going backwards until you find power. The first thing to test would be the spark plug wire, then the coil and then keep going until you find where the power stops/starts. Let us know some more info. / / |
|
02-13-2018, 10:23 AM | #3 |
Join Date: Feb 2018
Posts: 3
|
The problem is, I cant start anywhere as I need to make a whole new loom, I got the bike for free, without a loom unfortunately
|
|
02-13-2018, 12:56 PM | #4 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
Well now that is a problem. The wiring harnesses for anything China are almost universal fit. But you should be able to search Loncin 250 motorcycle wiring harness and get yourself a complete brand new harness. They aren't exactly plug and play but it will be a good start.
Here you go. https://www.ebay.com/sch/i.html?_fro...ness+&_sacat=0 / |
|
02-15-2018, 09:14 AM | #5 |
Join Date: Mar 2008
Posts: 2,436
|
Any pic from the actual bike (especially the engine)?
Very few chonda 250 using "ALL DC" system as above , it maybe a Suzuki clone Some1 may put wrong electronics when hope it works & ended up in ur hand as a freebie Anyway chonda reading should be similar to (DC cdi system more less the SAME)
__________________
|
|
02-15-2018, 10:22 AM | #6 | |
Join Date: Jun 2016
Location: Colorado
Posts: 1,107
|
Quote:
https://www.amazon.com/ask/questions...x2JG566MYJ3WNP
__________________
Bashan Blaze Mods: Alloy Rim's, Muffler, Mukuni VM26 Carb, Foam Filter, Tachometer, Volt Meter,LED Headlight, LED Blinkers |
|
|
03-08-2018, 01:12 PM | #7 |
Join Date: Feb 2018
Posts: 3
|
Im redoing the wiring loom, without all the unneccessary stuff
Im redoing the wiring loom, without all the unneccessary stuff,this is what I have so far, what do I have wrong and what do I have right?
|
|
03-09-2018, 12:03 AM | #8 |
Join Date: Mar 2008
Posts: 2,436
|
U can neglect/ bypass 3 yellow & reg's output during firing test if battery in OK condition...
[E-start] [IGN] Typical DC CDi off= cut "VDD/ +". Below is the typical pinout
__________________
|
|
|
|
|
|