|
ok set slide needle in middle slot and checked carb bowl floats and the floats are good. put carb back on no dice still bogging. did have to adjust mixture a bit after moving needle slot. then i put the carb from the working bike on the bogging bike and still no dice it is better, but still bogging at 3/4 to WOT. I am moving on to valve adjustments. any advice guys i would appreciate it. i think in this case carbs can be eliminated. also i took off and closely examined the intake tube/manifold. It has some cracks, but i put my hand over one end and sucked as hard as i can and there was no leaks i could tell. again any ideas? in the meantime gonna work on valve adjustments.
respectfully,
wisest.fool
|
12-28-2018, 05:47 PM
Threaded Mode