02-12-2019, 08:42 AM | #31 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
That's the gear postion switch.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
02-12-2019, 11:19 PM | #32 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
It is a shift indicator. Not all bikes China bikes have a digital gear display, but that is what operates it.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
02-12-2019, 11:57 PM | #33 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Jerry's answer is better. I failed to realize that he had posted before I responded.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
02-16-2019, 11:46 AM | #34 |
Join Date: Jan 2019
Location: Germany
Posts: 24
|
Ok I understand that.
Now I take out that from the engine an now I can use the kickstarter without problems but I see little pieces in the engine and I want to take all apart but this flywheel... I cant take it out... Someone know how I take this thing out? And know someone where can buy this try wing or what that is to take the bottom screws apart? |
|
02-20-2019, 09:57 AM | #35 |
Join Date: Jan 2019
Location: Germany
Posts: 24
|
Nobody can tell my why i can take that Flywheel out?
|
|
02-20-2019, 10:33 AM | #36 |
Join Date: Sep 2014
Posts: 1,913
|
I don't have a CG service manual with me in AZ but as I recall there are threads in the flywheel hub so you can screw in a bolt of the proper size so it will push against the crankshaft and push the flywheel off. It can take quite a bit of force if the woodruff key was sheared off when the engine stopped suddenly because of a piston failure.
|
|
02-21-2019, 09:49 AM | #37 |
Join Date: Jan 2019
Location: Germany
Posts: 24
|
but need i to take the middle or the 3 screws of the flywheel for pop it out?
i have a flywheel tool but i need to screw it in and then i can just pop it out when i screw the other side in. I need to remove the middel screw for that and the other 3 or do something else? |
|
02-21-2019, 10:06 AM | #38 |
Join Date: Sep 2014
Posts: 1,913
|
Remove the middle bolt and leave the 3 outer screws in place. They hold the starter clutch to the flywheel.
|
|
02-21-2019, 10:18 AM | #39 |
Join Date: Jan 2019
Location: Germany
Posts: 24
|
I try it but its too hard...
i hoppe i need to take it to te left to take it apart why all the others one. I lock the cylinder so that the flywheel didnt spin but nothing. to hard. maybe i need a impact gun for that : ( . |
|
02-21-2019, 11:18 AM | #40 |
Join Date: Sep 2014
Posts: 1,913
|
Yes, impact wrench may be necessary.
|
|
02-21-2019, 04:28 PM | #41 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,061
|
an impact wrench would certainly make it much easier to remove.
|
|
|
|
|
|