05-30-2019, 02:50 PM
|
#1 |
|
Join Date: Mar 2019
Posts: 45
|
Hellcat PZ25 carb main jet sizing
Running all stock Hellcat. I know carb set lean from factory. Hoping to dial in better running mixture. I wanted to retain stock intake, air box configuration so purchased:
https://www.ebay.com/itm/PZ-25-25-mm-CARBURETOR-ATV-DIRT-BIKE-Cable-choke-TAOTAO-Taomotor-Hellcat-125/113246503728?ssPageName=STRK%3AMEBIDX%3AIT&_trksid =p2057872.m2749.l2649 Installed and bogs at higher RPM. Hoping to change main jet and dial in this carburetor. Can someone comment on where to buy jets and sizes recommended? I'm at sea level. Top of jet is stamped with "74" or "14". Pic and dimensions below. Thanks. Dimensions: Overall Length=7mm Head Diameter=5mm Thread Diameter=4mm |
|
|
05-30-2019, 04:01 PM
|
#3 |
|
Join Date: Mar 2019
Posts: 45
|
I think these could work. Anyone have experience?
https://www.ebay.com/itm/10x-4mm-Mai....c100005.m1851 |
|
|
|
|
|
 |
|
|
Linear Mode
