hawk 250 front rim

Robert44 · 08-29-2019, 10:14 PM

alright guys, anyone else have anything like this happen to them? i'm in first gear making a sharp turn (in grass!!) and my front rim folds like a taco! so bad i could barely push the bike with the help of my son and he is huge. spokes also bent. cheapest i could find replacement is $135.00. anyone know a cheaper place? tire and disc seem to be ok.
thanks!!!

**JerryHawk250** · 08-30-2019, 07:55 AM

TXpowerports or RPS are the only two places I know of and they are over priced @ $135. CSC has the TT250 front wheel assemble for $95 but don't know if it will be an exact fit. https://store.cscmotorcycles.com/Pro...2D100&CartID=1

Buying a new rim and spokes to lace on will run you about the same as the stock wheel but will end up with a better wheel.

OneLeggedRider · 08-30-2019, 09:20 AM

I believe Mega said the TT250 hub is different.

NzBrakelathes · 08-30-2019, 09:53 AM

Maybe Bashan enforcer or the early blue eagle?
The non usd front end version
Try the sponser 250bross.com or look up top for their banner

Robert44 · 08-30-2019, 10:58 PM

rps want $200.00! that's a lot. everyone else seems to be out of stock.

Tashka · 08-31-2019, 12:28 AM

I bought an aluminum tusk rim and laced it on the stock hub
my friend has gone through 3 different stock front wheels. the last one bent too, but I went about 2 hours trueing it and I think its good.

Robert44 · 08-31-2019, 10:56 PM

what make did you choose for front rim? and where and what size spokes did you get? i don't know much about dirt bikes but i can turn a wrench. sorry to be a pain. thanks!

Tashka · 09-01-2019, 06:02 PM

I used the stock spokes and nuts, they worked fine although I had to cut some of the spoke ends because the pocket is a slight bit deeper. 21 x1.6 tusk aluminum rim
https://www.rockymountainatvmc.com/t...ct-rim-front-p

for the vehicle I put a honda crf 450. that will give you the right size for the 21 inch wheel. Itll take a couple hour to do it bu our geta much stronger wheel.

Robert44 · 09-01-2019, 10:14 PM

rim is ordered, thanks for all the help!!!!! was it difficult to cut off excess spoke? did all them need trimming??

08-29-2019, 10:14 PM	#1
Robert44 Join Date: Jun 2019 Posts: 27	hawk 250 front rim alright guys, anyone else have anything like this happen to them? i'm in first gear making a sharp turn (in grass!!) and my front rim folds like a taco! so bad i could barely push the bike with the help of my son and he is huge. spokes also bent. cheapest i could find replacement is $135.00. anyone know a cheaper place? tire and disc seem to be ok. thanks!!! __________________ 2019 Black Hawk 250 (PZ30 Keihin carburetor, 110 main, 45 slow. 17/50 Sprockets, NGK D8EA/2120 spark Plug)
	0

08-30-2019, 07:55 AM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,846	TXpowerports or RPS are the only two places I know of and they are over priced @ $135. CSC has the TT250 front wheel assemble for $95 but don't know if it will be an exact fit. https://store.cscmotorcycles.com/Pro...2D100&CartID=1 Buying a new rim and spokes to lace on will run you about the same as the stock wheel but will end up with a better wheel. __________________ 2025 Lifan KPT 400 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 (Sold) 2016 Black Hawk 250 (sold) 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

08-30-2019, 10:58 PM	#5
Robert44 Join Date: Jun 2019 Posts: 27	rps want $200.00! that's a lot. everyone else seems to be out of stock. __________________ 2019 Black Hawk 250 (PZ30 Keihin carburetor, 110 main, 45 slow. 17/50 Sprockets, NGK D8EA/2120 spark Plug)
	0

08-31-2019, 10:56 PM	#7
Robert44 Join Date: Jun 2019 Posts: 27	make of front rim what make did you choose for front rim? and where and what size spokes did you get? i don't know much about dirt bikes but i can turn a wrench. sorry to be a pain. thanks! __________________ 2019 Black Hawk 250 (PZ30 Keihin carburetor, 110 main, 45 slow. 17/50 Sprockets, NGK D8EA/2120 spark Plug)
	0

09-01-2019, 10:14 PM	#9
Robert44 Join Date: Jun 2019 Posts: 27	rim is ordered, thanks for all the help!!!!! was it difficult to cut off excess spoke? did all them need trimming?? __________________ 2019 Black Hawk 250 (PZ30 Keihin carburetor, 110 main, 45 slow. 17/50 Sprockets, NGK D8EA/2120 spark Plug)
	0

08-30-2019, 09:20 AM	#3
OneLeggedRider Join Date: Nov 2018 Location: Stockport, Oh. Posts: 1,442	I believe Mega said the TT250 hub is different.
	1

08-30-2019, 09:53 AM	#4
NzBrakelathes Join Date: Jun 2016 Location: Hell Posts: 2,408	Maybe Bashan enforcer or the early blue eagle? The non usd front end version Try the sponser 250bross.com or look up top for their banner
	0

08-31-2019, 12:28 AM	#6
Tashka Join Date: Aug 2018 Posts: 158	I bought an aluminum tusk rim and laced it on the stock hub my friend has gone through 3 different stock front wheels. the last one bent too, but I went about 2 hours trueing it and I think its good.
	3

09-01-2019, 06:02 PM	#8
Tashka Join Date: Aug 2018 Posts: 158	I used the stock spokes and nuts, they worked fine although I had to cut some of the spoke ends because the pocket is a slight bit deeper. 21 x1.6 tusk aluminum rim https://www.rockymountainatvmc.com/t...ct-rim-front-p for the vehicle I put a honda crf 450. that will give you the right size for the 21 inch wheel. Itll take a couple hour to do it bu our geta much stronger wheel.
	1