Bashan enforcer kill switch and turn signals

[SANDESH]

I don't have a wiring diagram to install the front blinkers on my new Enforcer. Is there anyone out there that has the patience and experience to walk me through this. In the meantime, I'll pick up an electrical circuit tester to find the hot blinking wire, test the light bulbs and otherwise poke around and see what luck I may have.

[NzBrakelathes]

Originally Posted by pete

Start it with out the key in the ignition ?

theres something very wrong in the wireing....


..

Unplug the ignition and most Chinese bikes start with the kicker.
Or under the seat or anywhere the black wire to battery positive n away you go.
ALL these are easy to steal.
My RX3 turns on with a remote AND THERE IS NO KEY NOW, harder to steal but still fairly easy if you spend a few minutes and have some wire

[NzBrakelathes]

Tacho to ground turns engine OFF. (CQR with DC ign uses this)
Ignition coil wire to ground turns engine OFF.( AC CDI uses this)
Very easy to make/Do

Check CDI if the 2 pin plug has a spare hole/no wire, use that to earth...