Tbr7 build

Rich1374670x · 09-13-2019, 11:07 AM

Just assembled a tbr7 and was wondering where these go. Does the nut replace the flatter nut on the front axle? Two little rubber grommets?

Rich1374670x · 09-13-2019, 11:13 AM

Pics didn't load

**JerryHawk250** · 09-13-2019, 11:19 AM

Welcome aboard! Try this.

How to Upload Pics Directly to the Forum
1. You must click on the "Post Reply" button, rather than typing in the "Quick Reply" box.
2. Click on the paper clip symbol.
3. Click "Browse" to find the picture on your hard drive.
4. Click "Upload".
5. Click "Close this window".
6. Click on the paper clip again, and you'll see your picture filename under the "Manage Attachments" header. Click on the filename.

Rich1374670x · 09-13-2019, 11:51 AM

Think I got it

kingofqueenz · 09-13-2019, 02:08 PM

Rich...

You are not alone and I have the same bike.

The rubber grommets are a mystery so I saved them.

Yes that nut was for shipping for the front axle to attach to the steel cage.

You replace with the obvious nut in the pack and i actually use that as a secondary we'll call it "lock nut" after the replacement nut is cinched down.

If you do as I do ...don't gorilla tighten that secondary nut on top of the first ( hope this makes sense ).

I literally just returned from riding my TBR ..enjoy the heck out of it and ride safe.

I have a youtube channel with a few vids up.. check it out

Be safe!

NzBrakelathes · 09-13-2019, 08:35 PM

rubber grommet sits in bottom of triple tree area and the headlight pins go in there

09-13-2019, 11:07 AM	#1
Rich1374670x Join Date: Sep 2019 Posts: 14	Tbr7 build Just assembled a tbr7 and was wondering where these go. Does the nut replace the flatter nut on the front axle? Two little rubber grommets?
	0

09-13-2019, 11:19 AM	#3
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,851	Welcome aboard! Try this. How to Upload Pics Directly to the Forum 1. You must click on the "Post Reply" button, rather than typing in the "Quick Reply" box. 2. Click on the paper clip symbol. 3. Click "Browse" to find the picture on your hard drive. 4. Click "Upload". 5. Click "Close this window". 6. Click on the paper clip again, and you'll see your picture filename under the "Manage Attachments" header. Click on the filename. __________________ 2025 Lifan KPT 400 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 (Sold) 2016 Black Hawk 250 (sold) 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

09-13-2019, 11:13 AM	#2
Rich1374670x Join Date: Sep 2019 Posts: 14	Pics didn't load
	0

09-13-2019, 02:08 PM	#5
kingofqueenz Join Date: Apr 2019 Location: Strong Island New Yawk Posts: 464	Rich... You are not alone and I have the same bike. The rubber grommets are a mystery so I saved them. Yes that nut was for shipping for the front axle to attach to the steel cage. You replace with the obvious nut in the pack and i actually use that as a secondary we'll call it "lock nut" after the replacement nut is cinched down. If you do as I do ...don't gorilla tighten that secondary nut on top of the first ( hope this makes sense ). I literally just returned from riding my TBR ..enjoy the heck out of it and ride safe. I have a youtube channel with a few vids up.. check it out Be safe!
	1

09-13-2019, 08:35 PM	#6
NzBrakelathes Join Date: Jun 2016 Location: Hell Posts: 2,408	rubber grommet sits in bottom of triple tree area and the headlight pins go in there
	2