04-16-2020, 07:28 PM | #46 | |
Join Date: Apr 2019
Posts: 336
|
Quote:
.....any tips on the fitment?
__________________
been around bikes for a while.... honda 72 cb200t, zuki 96?/2002 katana, 12 vstrom,09 vstar, kawi ltd440, 82 zuki Gs1100, Tao Tbr7 all about the Tao MotorsTBR7 http://www.chinariders.net/showthread.php?t=25553 |
|
|
04-16-2020, 08:21 PM | #47 | |
Join Date: Apr 2020
Location: New York
Posts: 4
|
Quote:
As for cdi, any specific recommendations? I think the plug that im supposed to be looking at is a DPR8, but im not sure if i have the resistor cap or not, so i wouldnt mind a upgrade. |
|
|
04-17-2020, 10:34 AM | #48 |
Join Date: Aug 2013
Location: Goodyear, Arizona
Posts: 410
|
I had to cut the middle pipe and and reposition it to clear the frame rail that the rear foot pegs mount on. It also would have fouled on the air box had I not removed it. You might be able to bend the pipe to make it fit, but I have a welder so I chose that route.
__________________
2020 Tao TBR7 9.3:1 PnP head CRF230F exhaust 4 degree advance key 290 degree cam Nibbi PE30 and cone filter Front fork brace |
|
04-17-2020, 10:40 AM | #49 | |
Join Date: Aug 2013
Location: Goodyear, Arizona
Posts: 410
|
Quote:
__________________
2020 Tao TBR7 9.3:1 PnP head CRF230F exhaust 4 degree advance key 290 degree cam Nibbi PE30 and cone filter Front fork brace |
|
|
04-19-2020, 07:58 PM | #50 |
Join Date: Apr 2019
Posts: 336
|
did the exhaust install... pics and notes are here...
https://www.chinariders.net/showthread.php?t=25770
__________________
been around bikes for a while.... honda 72 cb200t, zuki 96?/2002 katana, 12 vstrom,09 vstar, kawi ltd440, 82 zuki Gs1100, Tao Tbr7 all about the Tao MotorsTBR7 http://www.chinariders.net/showthread.php?t=25553 |
|
04-22-2020, 04:07 AM | #51 | |
Join Date: Apr 2020
Location: New York
Posts: 4
|
Quote:
I feel as if this bike just needs to be a different bike... Last edited by Aloha357; 04-22-2020 at 04:09 AM. Reason: add stuff |
|
|
04-22-2020, 08:36 AM | #52 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,051
|
a CDI coil is a CDI coil all it does is spark when commanded to by the cdi box... some people have even modded their bikes by using car style coil on plug units, all you do is extend the wiring from the coil to reach the now on plug coil. i have a GM C.O.P. unit in my toolbox to do that mod someday.... less high voltage wire= less resistance=hotter spark
|
|
04-22-2020, 09:32 AM | #53 | |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,589
|
Quote:
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel Last edited by JerryHawk250; 04-24-2020 at 02:22 PM. |
|
|
04-22-2020, 09:35 AM | #54 |
Join Date: Jun 2016
Location: Hell
Posts: 2,408
|
I have seen CDI and coil in 1
Hows that grab ya? |
|
04-24-2020, 02:16 PM | #55 | |
Join Date: Apr 2020
Location: South West
Posts: 9
|
428HD Chain doesn't fit with 17T Sprocket
Quote:
I find the above post to be true. I've attempted an HD chain and it hits the back of the case on my TBR7. The 17T sprocket mentioned fits but the larger change, my RT 428HD chain didn't fit. Any ideas about the correct chain for replacing the front sprocket on this bike, I'b purchased 2 and both don't fit. |
|
|
04-24-2020, 03:05 PM | #56 |
Join Date: Mar 2020
Location: Pennsylvania
Posts: 87
|
https://www.ebay.com/itm/293507941791
This is the chain I bought, it fit perfect. |
|
04-24-2020, 04:51 PM | #57 | |
Join Date: Apr 2019
Posts: 336
|
Quote:
__________________
been around bikes for a while.... honda 72 cb200t, zuki 96?/2002 katana, 12 vstrom,09 vstar, kawi ltd440, 82 zuki Gs1100, Tao Tbr7 all about the Tao MotorsTBR7 http://www.chinariders.net/showthread.php?t=25553 |
|
|
04-25-2020, 11:05 AM | #59 |
Join Date: Apr 2019
Posts: 336
|
awesome, thanks!
__________________
been around bikes for a while.... honda 72 cb200t, zuki 96?/2002 katana, 12 vstrom,09 vstar, kawi ltd440, 82 zuki Gs1100, Tao Tbr7 all about the Tao MotorsTBR7 http://www.chinariders.net/showthread.php?t=25553 |
|
05-01-2020, 04:12 PM | #60 |
Join Date: Apr 2020
Location: New York
Posts: 4
|
Just to let all the TBR7 people out there know that the muffler i picked up from Amazon did not have the correct flange size as i would have had to enlarge the holes due to the studs being further apart.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 So since i noticed they have the same diameter on the inside, i noticed the only real difference is the new one was open throughout the muffler part and the original had some plug in it, so i took it apart and cut off the plug, now its straight through with almost the same diameter except the tip that had the plug is slightly smaller. She sounds great! I also plugged that stupid port on the exhaust pipe. I also took advice and went 115 along with getting an accerator pump style carb and she boogies now with no flat spot!!! if y'all want pictures of plug I cut off, i still have it. Questions are: 1. Why wont the bike start with the choke on? 2. Why doesn't the kickstart work on a cold start? Is it related t question 1? |
|
|
|
|
|