![]() |
#1 |
Join Date: Apr 2020
Location: Douglasville, Ga
Posts: 25
|
![]()
What’s up guys so today I was changing my back sprocket when two of the bolts wanted to not turn so basically they got stripped. I already got new bolts but this really sucked. so have anyone ran into it this problem?
|
![]() |
![]() |
#2 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,064
|
More than a few people have had that issue. The fasteners on the cheaper bikes are made out of cheese. A lot of the hardware on my bike has been changed out to either OEM Honda parts, or fasteners that are actually graded as 10.9 Metric.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
![]() |
![]() |
#3 |
Join Date: Apr 2020
Location: Douglasville, Ga
Posts: 25
|
I noticed that and I think I may have to buy either a new back tire if I don’t get lucky to get the two that strip very very badly off. I think I’m gonna replace most of the nuts and bolts also.
|
![]() |
![]() |
#6 |
Join Date: Apr 2020
Location: Douglasville, Ga
Posts: 25
|
Where can I get the upgrade bolts and nuts from ?
|
![]() |
![]() |
#7 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,064
|
Quite literally the second link in my signature. Second post. Second Paragraph, Part number is in bold lol. This number, to be specific. 90128-ke2-940
http://www.chinariders.net/showpost....70&postcount=2 Pick up some metric serrated flange nuts or nylock nuts with a washer, grade 10.9 or better, from a hardware store. Problem solved.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
![]() |
![]() |
#9 |
Join Date: Apr 2020
Location: Douglasville, Ga
Posts: 25
|
Ok thanks Dan and I already have your upgrade page saved super helpful
|
![]() |
![]() |
#10 |
Join Date: Apr 2019
Posts: 336
|
😂😂
__________________
been around bikes for a while.... honda 72 cb200t, zuki 96?/2002 katana, 12 vstrom,09 vstar, kawi ltd440, 82 zuki Gs1100, Tao Tbr7 all about the Tao MotorsTBR7 http://www.chinariders.net/showthread.php?t=25553 |
![]() |
![]() |
#11 | |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,054
|
Quote:
![]() ![]() ![]() |
|
![]() |
|
![]() |
![]() |
|
|