Go Back   ChinaRiders Forums > Technical/Performance > Street
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 05-13-2020, 02:54 AM   #1
BrandonDorch   BrandonDorch is offline
 
Join Date: May 2020
Location: Illinois
Posts: 4
Vader 125-10 mikuni carb upgrade

so I put a mikuni knock off carb on my vader. Ive already put it on did the block off plate on the head removed the charcoal canister and it starts right up easy and idles great.So what do I do to the line that comes out of the gas tank that was attached to the charcoal canister? Do you use the port in the side of the new carb for anything?


 
Reply With Quote
Old 05-13-2020, 06:07 PM   #2
ripcuda   ripcuda is offline
 
ripcuda's Avatar
 
Join Date: Mar 2015
Location: Spokane, WA
Posts: 253
On my Hellcat 125... I too removed my fuel vent canister, but have not decided what to do with the fuel tank vent line yet. For now it's just running down along the frame. I've never filled my tank to the brim... so I'm not sure if this vent would ever drip raw fuel or if it's baffled in the tank to only allow fumes out. On all my dirt bikes the vent is in the gas cap and a simple hose is routed up over the triple tree. I think once I put my plastics back on, I'll ziptie the vent hose as high as possible somewhere it can just vent.


Are you using the stock airbox? Does your Vader have a crankcase breather hose? I have one on my Hellcat still connected to my airbox... but am planning to go VM22 Mikuni and pod filter and will have same issue with this hose. I guess I'll just ziptie it off somewhere up high and let it breath. Or maybe fit a barb on the pod filter to connect it.



Cheers!
__________________
'20 TaoTao Hellcat 125 "grommet"
'04 Yamaha TTR-125LE
'00 Yamaha TTR-90
'07 Kinroad XT200GY Runmaster (sold)
'07 KMD GY6 150cc ATV (sold)
'07 Kangchao 250cc ATV Monster (sold)
Baja Moto DB-30 "Doodlebugs"(x3) (sold)
'06 Hi-Bird 200 parts bike (sold)


 
Reply With Quote
Old 05-13-2020, 06:51 PM   #3
BrandonDorch   BrandonDorch is offline
 
Join Date: May 2020
Location: Illinois
Posts: 4
So I have removed the stock air box and am using a double like foam filter that came with the new carb...yes I have a crank case breather on my bike and I have a small pod style filter from advanced auto parts on that zip tied up in the frame...i have a small 110 atv that vents the gas tank out the cap and has a small breather thing on it im think about buying one of those and putting it on there I guess...I'd post pics but not sure how to do it


 
Reply With Quote
Old 05-16-2020, 02:44 PM   #4
Ninjaguy23   Ninjaguy23 is offline
 
Ninjaguy23's Avatar
 
Join Date: Apr 2020
Location: Tacoma, Washington
Posts: 36
What did you use for your emissions block off plate??


 
Reply With Quote
Old 05-16-2020, 05:16 PM   #5
RedCrowRides   RedCrowRides is offline
 
Join Date: Jun 2018
Location: Florida
Posts: 759
The block off plate from a Gy6 fits perfectly, you can find it on Ebay. Oh hell, i 'll give you the link :


https://www.ebay.com/itm/Universal-E...MAAOSwCMtacNc1
__________________
2001 Mustang GT
2004 Sportster
2018 VADER
2020 Orion RXB250L


 
Reply With Quote
Old 05-16-2020, 09:08 PM   #6
SilverBullet51   SilverBullet51 is offline
 
Join Date: Apr 2017
Location: Plainwell, MI
Posts: 60
Quote:
Originally Posted by Ninjaguy23 View Post
What did you use for your emissions block off plate??
On my wife's bike I cut the hard pipe off the egr, and took it off and shoved a penny over the hole. Put the plate back on sandwiching the penny against head. It's a 1 cent block off plate. And it's sealed tight.


 
Reply With Quote
Old 05-17-2020, 09:19 PM   #7
BrandonDorch   BrandonDorch is offline
 
Join Date: May 2020
Location: Illinois
Posts: 4
Quote:
Originally Posted by Ninjaguy23 View Post
What did you use for your emissions block off plate??
I cut the tube off the plate that was on the bike and used my harbot freight 99 bucks welder and just welded the hole closed


 
Reply With Quote
Old 05-20-2020, 08:03 PM   #8
Ninjaguy23   Ninjaguy23 is offline
 
Ninjaguy23's Avatar
 
Join Date: Apr 2020
Location: Tacoma, Washington
Posts: 36
All Good info!!
Thanks for the link Crow!!

Cheers!


 
Reply With Quote
Reply

Tags
125cc, boom, clone, grom, vader



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:15 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.