Go Back   ChinaRiders Forums > Technical/Performance > ATVs
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 05-28-2020, 09:59 PM   #1
Tabbed   Tabbed is offline
 
Join Date: May 2020
Posts: 12
New carb

Installed a new carb today but on the old air filter box it had a crank case vent hose going into it I think nowhere on new carb or new filter does it have anything to put that hose do I just leave it open to.keep pressure down or do I pit a cork of some kind in it? Thanks in advance


 
Reply With Quote
Old 05-29-2020, 07:52 AM   #2
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,578
Keep it open to the air. You can pick up a small crank case vent filter at Autozone. https://www.autozone.com/external-en...ter/153665_0_0
__________________
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 05-29-2020, 08:08 AM   #3
Mudflap   Mudflap is offline
 
Join Date: Sep 2014
Posts: 1,889
The standard way to do it was an open hose that vented an inch or two below the bottom of the engine. Thats what I use on all my bikes. Old cars used the same setup. Don't plug it. A filter is ok too but don't let it get clogged.


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:10 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.