08-09-2020, 09:14 PM | #1 |
Join Date: May 2020
Location: Newark ca
Posts: 34
|
csc tt250 jetting help
Hi there,
Im alittle lost on my tunning and i was hoping i could get your input or advise. I got a tt250 with some mods Ebay exhaust 115 main jet from csc with 40 pilot jet Needle down to the 4th notch Fuel mixture screw to 2 1/2 turns 45t rear sprocket with unibear chain Emissions crap delete Here are my 2 problems. 1. I changed my oil at around 200miles(i can't remember exactly) the oil was abit dark not too much metallics on screen. I changed it again at around 650miles (by this time i installed the jet kit with the fuel mix needle at 2 1/2 )the oil really i mean really smelled like gas. So i thought i must be running way too rich. Have you guys had this problem before? Should i worry about it?(That is one of my problems i will change my oil again at 900-1000 miles to see how it looks) 2nd problem is after i deleted all the emissions crap( i did not delete the carbon canister or whatever its called. )I decided to go back to the stock pilot jet which is a 38( i read on a post here that it is better after deleting emissions crap) i put the fuel mixture at 2 turns out and the bike pulls strong much stronger. It does not bog at all but i get back firing when im in gear and i let go off the throttle which i read it means im running lean. Does that sound about right? I played with the fuel mixture between 1 3/4-3 turns out and i like it between 2- 2 1/4.i ran the bike for 20 miles and like i said pulls strong but im wondering about the exhaust popping when i let go off the throttle? If this is normal then great i like how it performs Thanks in advance Last edited by Choco; 08-10-2020 at 01:18 AM. |
|
08-10-2020, 08:44 AM | #2 | |
Join Date: Nov 2019
Posts: 353
|
Backfire could be valves
Quote:
__________________
CSC TT250 Orion RXB 150XL |
|
|
08-10-2020, 10:48 AM | #3 | |
Join Date: May 2020
Location: Newark ca
Posts: 34
|
Quote:
It wasnt back firing with the 40pilot jet, but it pulls harder the way i have it now. I just want to make sure i wont mess up the bike running it like this. I also wanted to lean it abit to see if that solves the gas smell in the oil |
|
|
|
|
|
|