Lifan X-PECT parts

tophattitus · 07-14-2020, 02:28 PM

I was looking into getting a lifan x-pect and i was wondering where would i get parts from. i know taotao uses partskit, but is there a website to order parts for lifans or do you have go through a dealership/lifan themselves? just trying to do research before i jump the gun.

oincman · 07-15-2020, 07:46 AM

Lifan sells some of their parts on Amazon. Unfortunately it's still quite new and not a lot of parts out there yet.

LoneStarGazer · 07-17-2020, 03:57 PM

It looks like most, if not all, parts and frackles, for this largely Honda clone bike are widely available, but only if you knew exactly which particular bike to specify, unfortunately, as I’m beginning to figure out. It sure would be nice if there was a motorcycle parts database that cross either referenced all compatible bikes (quite an undertaking, I presume) or at least provided dimensions of common parts instead of just listing parts by (major manufacture’s) make and model. I finally just ordered a pair of oversized foot pegs that I suspect will fit, only because after a half dozen email exchanges, I couldn’t get the manufacturer or seller to provide critical dimensions (because it’s easier for them to simply say “this fits a 02-12 Honda XR199K”) This isn’t rocket science, and with computers and the internet, should be a relative piece of (Chinese) cake.

tophattitus · 07-17-2020, 09:53 PM

Alright, appreciate the help guys!

coolerinfrederick · 07-18-2020, 08:30 PM

this is one thing i regrettably did not consider. with covid 19 its near impossible to get in touch with american Lifan

oincman · 07-19-2020, 06:29 PM

I have had tremendous success emailing them.

tophattitus · 07-21-2020, 12:08 AM

Quote:

Originally Posted by oincman

I have had tremendous success emailing them.

i might give that a shot because i love the xpect, but theres no dealers near me, and if i have a problem id love to be able to get parts for it.

coolerinfrederick · 08-18-2020, 12:10 PM

American Lifan will get back to you, and instantly refer you to a dealer.

ss27gogeta · 08-18-2020, 12:32 PM

Ive been wonering how to get ahold of parts as well I need new silver plastic pices I went to paint them black and I scuffed them up to bad now the scratches show through the paint and will need new ones to re do it.

oincman · 08-18-2020, 09:02 PM

Email them. Even with coronageddon they still answer all my emails.

coolerinfrederick · 10-24-2020, 12:02 PM

so i recently damaged a front fork and bent the front axle bolt. along with the typical parts breaking on trails. i reached out to orion power sports. they have been willing to help and see if the parts are available by american Lifan. its been a few weeks back and forth with emails and it seems an uphill battle even to get a axle bolt. but at least Orion is the 1 distributor willing to help. i would recommend them to anyone and plan on buying my kp mini from them next spring if i decide to not get the sur ron

oincman · 11-06-2020, 08:05 AM

You might want to try belmontbikes aka venommotorsports. I got my KPM and 125cc Bobber from them. They have been extremely helpful with support and parts.

07-14-2020, 02:28 PM	#1
tophattitus Join Date: Aug 2019 Posts: 22	Lifan X-PECT parts I was looking into getting a lifan x-pect and i was wondering where would i get parts from. i know taotao uses partskit, but is there a website to order parts for lifans or do you have go through a dealership/lifan themselves? just trying to do research before i jump the gun.
	0

08-18-2020, 12:32 PM	#9
ss27gogeta Join Date: Aug 2019 Location: Indiana Posts: 176	Ive been wonering how to get ahold of parts as well I need new silver plastic pices I went to paint them black and I scuffed them up to bad now the scratches show through the paint and will need new ones to re do it. __________________ Current Bikes 2019 Lifan Xpect 2016 Harley Davidson Roadster
	0

07-15-2020, 07:46 AM	#2
oincman Join Date: Nov 2019 Posts: 99	Lifan sells some of their parts on Amazon. Unfortunately it's still quite new and not a lot of parts out there yet.
	0

07-17-2020, 03:57 PM	#3
LoneStarGazer Join Date: Jun 2020 Location: NOLA->NM/CO->Baja Posts: 11	It looks like most, if not all, parts and frackles, for this largely Honda clone bike are widely available, but only if you knew exactly which particular bike to specify, unfortunately, as I’m beginning to figure out. It sure would be nice if there was a motorcycle parts database that cross either referenced all compatible bikes (quite an undertaking, I presume) or at least provided dimensions of common parts instead of just listing parts by (major manufacture’s) make and model. I finally just ordered a pair of oversized foot pegs that I suspect will fit, only because after a half dozen email exchanges, I couldn’t get the manufacturer or seller to provide critical dimensions (because it’s easier for them to simply say “this fits a 02-12 Honda XR199K”) This isn’t rocket science, and with computers and the internet, should be a relative piece of (Chinese) cake.
	0

07-17-2020, 09:53 PM	#4
tophattitus Join Date: Aug 2019 Posts: 22	Alright, appreciate the help guys!
	0

07-18-2020, 08:30 PM	#5
coolerinfrederick Join Date: Jun 2020 Posts: 8	this is one thing i regrettably did not consider. with covid 19 its near impossible to get in touch with american Lifan
	0

07-19-2020, 06:29 PM	#6
oincman Join Date: Nov 2019 Posts: 99	I have had tremendous success emailing them.
	0

08-18-2020, 12:10 PM	#8
coolerinfrederick Join Date: Jun 2020 Posts: 8	American Lifan will get back to you, and instantly refer you to a dealer.
	0

08-18-2020, 09:02 PM	#10
oincman Join Date: Nov 2019 Posts: 99	Email them. Even with coronageddon they still answer all my emails.
	0

10-24-2020, 12:02 PM	#11
coolerinfrederick Join Date: Jun 2020 Posts: 8	so i recently damaged a front fork and bent the front axle bolt. along with the typical parts breaking on trails. i reached out to orion power sports. they have been willing to help and see if the parts are available by american Lifan. its been a few weeks back and forth with emails and it seems an uphill battle even to get a axle bolt. but at least Orion is the 1 distributor willing to help. i would recommend them to anyone and plan on buying my kp mini from them next spring if i decide to not get the sur ron
	0

11-06-2020, 08:05 AM	#12
oincman Join Date: Nov 2019 Posts: 99	You might want to try belmontbikes aka venommotorsports. I got my KPM and 125cc Bobber from them. They have been extremely helpful with support and parts.
	1