![]() |
#1 |
Join Date: Nov 2020
Posts: 5
|
![]()
I recently swapped/upgraded to the Mikuni VM22 carb on my apollo RFZ 110cc. I notice a lot of play in the throttle, and the cable seems to be too long. The older carb PZ19, I believe, had an elbow on it, and the VM22 does not. Has anyone else run into this issue?
|
![]() |
![]() |
#3 |
Join Date: Nov 2020
Posts: 5
|
Thanks, I finally received the part, and not it looks like the throttle cable is too short. I am wondering if I need to cut the black housing, it seems like the inner cable is the right size. I believe they call that the offset measurement.
|
![]() |
![]() |
#5 |
Join Date: Nov 2020
Posts: 5
|
Thank everyone, but I finally got everything on the bike and it looks like the VM22 is too much carb for the Apollo RFZ 110cc. For now, I am going to go back to a PZ19. I may look at the VM16 in the future, the kiddo needs to get back on the dirt
![]() |
![]() |
|
![]() |
![]() |
Tags |
apollo 110, apollo rfz, mikuni, vm22 |
|
|