Installed Tst fender elim./tail light and now bike won't start

[Medicbobs]

Originally Posted by Underachiever

So as the title says, I installed the fender eliminator and integrated taillight on my vader 2. Wired it up (didn't see any reference pics or diagrams til after I had already chopped the harnesses), and now the bike won't start. It's wired as so:
Vader baby blue to Tst brown
Vader orange to tst green
Vader yellow and green to tst yellow
Vader brown to tst blue
Vader green to tst black
Vader green and brown pair of wires doing nothing and vader green ground I assume doing nothing.
When I turn the key nothing happens and dash doesn't light up. Battery is good and I also redid all the connections to make sure the wiring was good. Any suggestions on what to do?

Check out my post on the wiring. It took me a minute to figure it out and I blew a couple fuses, so if it's not starting I'd check that first. I have the same tail light and have everything working so double check the wiring once more.

*Green is always a ground on this bike. That left over brown wire is for the license plate light. There is a picture included in the post too. Let me know if you need any help.

http://www.chinariders.net/showthread.php?t=27297