KPM Delivery and Build

[Coloradogoose]

Originally Posted by oincman

Not yet. Having a hellofa time finding tires that will fit the rear. If anybody has found any, please lemme know.

Good to know. I'm thinking of trying the Shinko 244 in a 17x4.6 and running a 17x3.0 up front. I'd rather a tire more like their 704/705, but if it's a little more dirt worthy, I'll take it. I'm still breaking my KPM in so it'll be a while before I make the swap, but I'll post back here once I know if it works or not.

[Chris_Top_Her]

Originally Posted by oincman

Not yet. Having a hellofa time finding tires that will fit the rear. If anybody has found any, please lemme know.

Stock front 100/80/17 ~91 mm, stock rear 130/70/17 ~ 80mm . Difference of height of 1.1 cm. But for your sizing, it might help to look at tires sized in inches (many smaller dualsport/dirt tires). Convert the first number (width) from mm to inches In your case 100/80/17 = ~4.33x17 and 130/70/17 = ~5.12x17.

This tire (front and rear use) is available in 4.6", and 5.1" and DOT (road legal) Shinko 244

https://www.motosport.com/product/?c...1-Y003&variant[SHT000V]=SHT000V-X001-Y021

That's probably as close as you will get to stock dimensions and they are cheap tires too.

[freezerboy]

I have seen several videos of the KPM with the kpr's exhaust on it. It looks and sounds very nice with that setup.