|
![]() |
#1 |
Join Date: Nov 2020
Location: Northern Neck of Virginia.
Posts: 166
|
I do not want to appear critical but are you claiming a new packaging crate cause that is all I can see barring a scratch on the back rim. What other damage was there to the bike itself. The difficulty here is where was the damage done at Powersports Max or by the transport carrier. Once the package leaves the supplier the carrier would be liable for damage and if you can prove that they caused the damage you would have to deal with the carriers insurance and good luck with that. But still you should expect Power Sport Max to assist you in sorting this out.
|
![]() |
![]() |
#2 | |
Join Date: Sep 2022
Location: Lisbon, IA
Posts: 24
|
Quote:
![]() I am on the road again for 2 weeks for work and have limited connectivity and pc access where I am. Forums from a mobile phone is not the best either. |
|
![]() |
![]() |
#3 |
Join Date: Sep 2022
Location: Lisbon, IA
Posts: 24
|
More photos
|
![]() |
![]() |
#4 |
Join Date: Sep 2022
Location: Lisbon, IA
Posts: 24
|
more photos2
|
![]() |
![]() |
#5 |
Join Date: Sep 2022
Location: Lisbon, IA
Posts: 24
|
more photos3
more photos3
|
![]() |
![]() |
#6 |
Join Date: Sep 2022
Location: Lisbon, IA
Posts: 24
|
90% Complete after assembly oil change and first test ride down driveway. Had not attached tank plastics yet. I guess I didn't get any shots that clearly show just how bent the front brake lever was, arrow shows direction of bend.
I went ahead and bent the rear brake pedal out from the case and the front brake lever so it wasn't so hard to reach. |
![]() |
![]() |
#7 |
Join Date: Sep 2022
Location: Lisbon, IA
Posts: 24
|
Random updates... I had one further email exchange with "zora" Sept 13th regarding things damaged from shipping and have received nothing further since. No offer of parts or other compensation. Based on comments/reviews left on the powersportsmax facebook page I have given up any expectation that x-prousa/ powersportsmax/ maxpro/ motopro will make anything right with me. Shame on me for not searching that out previously.. I regret the purchase to the extent that support is craptastic. Definitely not a bike for someone not adept at wrenching and figuring mechanical things out. I think the bike is a great value, just expect NO support. In hindsight I should have went with the Lifan KPX or the new FI Orion RXB250.
As far as break in goes, I am approaching 300 miles. I have had 3-4 instances of what seemed like trans gear jump or slipping that seemed to disengage the drive under throttle and hi rev the engine. I don't have another one to compare to but it also sounds like excessive noise from the trans sometimes. This is concerning... I also have a vibration at certain rpms that I think is coming from inside the muffler. My exhaust note/tone changed, heated up enough to make the bumpers start melting and fall out and there is a distinct discoloration on muffler. Makes me wonder if something popped loose inside. I will be removing and inspecting when I take exhaust off to gut the cat. Does anyone else have similar discoloration on muffler?
__________________
2022.5 X-pro Templar-X 6 speed undergoing break-in. 130 main, 42 idle, shimmed needle .042", 2.5 turns out mixture. 142T rear sprocket. CAT delete "kit". Modified starter interlock. 2022 Pioneer SHNG - SSR XF250. Sigma Jet Kit, Muffler & Air inject delete. |
![]() |
|
![]() |
![]() |
|
|