05-18-2023, 03:42 PM | #1 |
Join Date: Mar 2021
Posts: 21
|
Pentora 230cc problem
So I changed my valves seals and followed the Honda service manual to set timing where u put the cam with the lobes down and light up the line on the flywheels.now the problem I’m having is that it starts but dies.It runs if I keep throttle on it but once I let off it dies.Also when I start it and give it throttle it hesitates a bit.When I let it die it will also sometimes pop.The sound it makes when it dies is like a stalling sound.I think it could be the valve lash too thight.Am I right?or is the timing off even though I followed the steps right?
|
|
05-18-2023, 03:47 PM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
Recheck valve lash. Also check you that you have all vacuum line connected and/or plugged.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
|
|