Bike wont start in neutral any more. Any way to fix this?

mikaserla · 08-25-2008, 08:24 AM

I have a gy200-2. It used to turn over and start in neutral with the clutch out.

Now the only way I can get it to turn over is to pull the clutch in.

This is not a big problem but it I would still like it to fix it if it is possible.

mblas3 · 08-25-2008, 10:21 AM

Look at your wire ball behind the headlight for the diode and see if has unpluged or a wire broke.

Mark

monkeyboy · 08-25-2008, 11:21 AM

My clone will only start with the clutch pulled in. Sounds like maybe it fixed itself?

Motoman · 08-25-2008, 10:06 PM

Mine won't start without the clutch pulled in. It's a safety thing to keep it from starting in gear. I agree with monkeyboy, sounds like it fixed itself.

IronFist · 08-25-2008, 10:42 PM

The correct 2 wires actually came together, well that would be a first 8O

My wires don't attach, they detatch.

monkeyboy · 08-26-2008, 12:54 AM

Same here. The latest is no brake light with the front brake, but works fine with the back, lol!

IronFist · 08-26-2008, 01:00 AM

Monkey those are two different wires. Check, (don't smash with the hammer) the on off switch at the front break handle, it might not be engaging properly. I needed to use a dab of JB on the handle to make the switch close when the handle was released. Might be something else but that was my problem.

katoranger · 08-27-2008, 05:01 PM

I have bypass the clutch safety switch so my bike will now start in gear. The wire broke off the diode so I just disconnected it and the clutch switch wire was pinched during assembly. I just spliced those together completing that circuit.

WARNING. Make sure bike is in neutral before starting or clutch is in.

Allen

08-25-2008, 08:24 AM	#1
mikaserla Join Date: May 2008 Posts: 18	Bike wont start in neutral any more. Any way to fix this? I have a gy200-2. It used to turn over and start in neutral with the clutch out. Now the only way I can get it to turn over is to pull the clutch in. This is not a big problem but it I would still like it to fix it if it is possible.
	0

08-25-2008, 11:21 AM	#3
monkeyboy Join Date: May 2008 Location: Seattle Posts: 74	My clone will only start with the clutch pulled in. Sounds like maybe it fixed itself? __________________ 2005 Diamo LS200 2009 WR250R 2010 Motobike Hyper
	0

08-25-2008, 10:06 PM	#4
Motoman Join Date: Jul 2006 Location: Fresno, CA. Posts: 45	Mine won't start without the clutch pulled in. It's a safety thing to keep it from starting in gear. I agree with monkeyboy, sounds like it fixed itself. __________________ 2006 Jetmoto TT200GY 2000 Suzuki VS800GL
	0

08-25-2008, 10:42 PM	#5
IronFist Join Date: Apr 2007 Location: Toronto Ontario Canada Posts: 2,585	The correct 2 wires actually came together, well that would be a first 8O My wires don't attach, they detatch. __________________ IronFist ___________________________________ The "chain" of command is used for beating spammers. ___________________________________
	0

08-26-2008, 12:54 AM	#6
monkeyboy Join Date: May 2008 Location: Seattle Posts: 74	Same here. The latest is no brake light with the front brake, but works fine with the back, lol! __________________ 2005 Diamo LS200 2009 WR250R 2010 Motobike Hyper
	0

08-25-2008, 10:21 AM	#2
mblas3 Join Date: Mar 2007 Posts: 120	Look at your wire ball behind the headlight for the diode and see if has unpluged or a wire broke. Mark
	0

08-26-2008, 01:00 AM	#7
IronFist Join Date: Apr 2007 Location: Toronto Ontario Canada Posts: 2,585	Monkey those are two different wires. Check, (don't smash with the hammer) the on off switch at the front break handle, it might not be engaging properly. I needed to use a dab of JB on the handle to make the switch close when the handle was released. Might be something else but that was my problem. __________________ IronFist ___________________________________ The "chain" of command is used for beating spammers. ___________________________________
	0

08-27-2008, 05:01 PM	#8
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	I have bypass the clutch safety switch so my bike will now start in gear. The wire broke off the diode so I just disconnected it and the clutch switch wire was pinched during assembly. I just spliced those together completing that circuit. WARNING. Make sure bike is in neutral before starting or clutch is in. Allen __________________ You meet the nicest people on a Honda Clone.
	0