![]() |
#1 |
Join Date: Jan 2007
Posts: 36
|
What parts have failed on your bike?
Hi,
I'm curious what parts fails most frequently on china bikes. So please post what parts have failed in this thread. In 3 years I've had: 1 . Battery 2. Wiring (bad connections) 3. Speedometer 4. wheel bearings (all of them) 5. Broken motor mount I'm hoping we could make a list of things that needs regular inspection or maintenance. Thanx! ![]() |
![]() |
![]() |
#2 |
Join Date: May 2008
Posts: 527
|
never had a problem with mine that was not caused by poor build of parts.
all the problems with mine where factory workers and the idioit that put my bike togather...aka me :oops: |
![]() |
![]() |
#3 |
Join Date: Jun 2008
Location: Central Pennsylvania
Posts: 125
|
The only real part failure I've had with mine in the 2 months I've owned it was the solenoid. ('08 Hsun GY200).
|
![]() |
![]() |
#4 |
Join Date: Jan 2007
Location: Northern Vermont, USA
Posts: 1,271
|
Oops, edit. 2 years, 3000+ miles on my 06 Roketa. Only failures have been the battery box, and fuel tank (crack on bottom where petcock attaches. Replaced with Hi-Bird tank, good to go!).
__________________
First Chinabike: 2006 Roketa RSX200E Current Chinabikes: 2023 Titan DLX & 2022 Lifan KP Mini w/ 210cc BRT kit, 22 RWHP! |
![]() |
![]() |
#5 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
18 months. 8400 miles.
Gas Tank started leaking. Bulbs, upgraded the motor mount bolts. Bad wiring connections and low quality wires. Other than that really nothing big. Allen
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#6 |
Join Date: Feb 2008
Posts: 392
|
HSUN 200GY 2007....the only faults that were not my own are.side panels have bad placement I replaced with Acerbis Honda panels which fit better
-nuts and bolts frequently loosen -the whole emmissions system thing -speedometer is ok but not great -plastics, rear fender and lighting is too fragile nothing else really at about 1000 miles! |
![]() |
![]() |
#7 |
Which model honda are the panels for?
__________________
2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy ![]() Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter |
|
![]() |
![]() |
#8 |
Join Date: Feb 2008
Posts: 392
|
CRF450, They are not an exact clone fit but they are more flexable than the stock which I couldnt even get back on at all...they dont fit under the seat at all and I only put one on the left side to cover the battery but I could but the other one on to but I didnt want to bulk up the bike!
|
![]() |
![]() |
#9 |
Join Date: Jul 2007
Location: Hyak, WA
Posts: 448
|
2005 Tank Trail 200.
List of failed parts: -=ZERO=- But, I did replace the battery in 2007 but I don't consider that a 'failed' part since it is really not part of the bike.
__________________
1985 Kawasaki Tecate-3 1997 Ural Sportsman 2WD 1980 Yamaha XS1100 2005 TANK Trail 200 2009 Lifan LY110GY-3 (2) |
![]() |
![]() |
#10 |
Join Date: Mar 2008
Location: West Virginia
Posts: 629
|
My Viva VX200SX has 4600 km now and managed to melt a turn signal (while modding the exhaust with a torch) and cracked the throttle grip tube.
Blew out one those horrible OEM inner tubes. :evil: Chewed up the swingarm chain mat due to small sprocket replacement. Engine tranny- nada problemo :wink:
__________________
Wayne Wildfire WF300-SP |
![]() |
![]() |
#11 |
Join Date: Aug 2008
Posts: 28
|
Skyteam 200 double purpose bike:
1. Collapsed handlebar after a landing. :? 2. Mixed up wiring. :roll: 3. Never ending-stretching of the chain. :x 4. Fuel lines... although they didn't really fail they were so thin walled they were dangerous and also collapsed on bends. :roll: 5. My footpegs are starting to bend down I think, although I haven't checked if it's the rod, the footpes or the footpegs mount at the frame!!!! 8O ... Jeeeeeezzzz, this is becoming depressing!! |
![]() |
![]() |
#12 |
Join Date: Apr 2007
Location: Toronto Ontario Canada
Posts: 2,585
|
150cc Xingyue Easy
Front inner Tube. Rear plastic fender. Heat shield came off. 7000KMs last season. |
![]() |
![]() |
#13 |
Join Date: Jan 2007
Posts: 101
|
the back mount for the fender
busted on me driving logging roads last year tied it up with parachute cord and went into town to have a guy weld it back for me he asked me for ten bucks but i gave him 40.00 nice thing about small towns
|
![]() |
![]() |
#14 | |
Join Date: Jan 2007
Location: Northern Vermont, USA
Posts: 1,271
|
Quote:
__________________
First Chinabike: 2006 Roketa RSX200E Current Chinabikes: 2023 Titan DLX & 2022 Lifan KP Mini w/ 210cc BRT kit, 22 RWHP! |
|
![]() |
![]() |
#15 | ||
Join Date: Aug 2008
Posts: 28
|
Quote:
|
||
![]() |
|
![]() |
![]() |
|
|