2008 Hsun gy200 black - Page 2

FastDoc · 04-10-2009, 06:14 PM

Some people put some duct tape over the blinker beeper. I might do that too. Irritates me so much I don't want to use the directionals.

You have a loose connection somewhere. Check behind the headlight area and where the wires connect to the blinker itself. Try measuring the voltage at the bulb socket. Does the other blinker function?

Each of the two I assembled had a broken wire or three that needed repair.

joebrads · 04-11-2009, 10:27 PM

I am thinking about disconnecting the sound for the blinkers, you draw attention when you use them. I guess they do there job for sure.

SeerAtlas · 04-15-2009, 11:49 AM

Well, got two emails yesterday from Olson saying my bike was shipped from the 'warehouse' in houston. We will see...I'll feel a lot better when I get some tracking information but in the meantime...drama drama.

Now I'm scanning the i'net trying to figure out which importer has a warehouse in Houston.

Seer

theENIGMATIC · 04-15-2009, 09:46 PM

I have a 2007 HSUN GY...your front heat sheild will probably fall off, and it's a problem to get back on.....main deal is the swingarm bolt, it should be replaced as I think they are too small and fragile, get a slightly thicker and longer bolt and put it in if you have to bang it with a sledgehammer...it's not worth the risk having it break like mine did......other than that the bike is good enough for me and I can't wait to start riding it again....other notes.....side panels do not line-up right.must have been bent in with machines,might get small engine oil leaks...front fender is more durable than you think.good luck, best mod I made was a 45watt headlight.had to unplug the license plate light to run it!

P.S. As hard as it is not to do..do not BABY this bike.it will only let you down.take the good with the bad and hope you survive..just like with any bike!

04-10-2009, 06:14 PM	#16
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	Some people put some duct tape over the blinker beeper. I might do that too. Irritates me so much I don't want to use the directionals. You have a loose connection somewhere. Check behind the headlight area and where the wires connect to the blinker itself. Try measuring the voltage at the bulb socket. Does the other blinker function? Each of the two I assembled had a broken wire or three that needed repair. __________________ Happy to serve.
	0

04-11-2009, 10:27 PM	#17
joebrads Join Date: Mar 2009 Posts: 36	I am thinking about disconnecting the sound for the blinkers, you draw attention when you use them. I guess they do there job for sure.
	0

04-15-2009, 11:49 AM	#18
SeerAtlas Join Date: Apr 2009 Posts: 770	Well, got two emails yesterday from Olson saying my bike was shipped from the 'warehouse' in houston. We will see...I'll feel a lot better when I get some tracking information but in the meantime...drama drama. Now I'm scanning the i'net trying to figure out which importer has a warehouse in Houston. Seer
	0

04-15-2009, 09:46 PM	#19
theENIGMATIC Join Date: Feb 2008 Posts: 392	I have a 2007 HSUN GY...your front heat sheild will probably fall off, and it's a problem to get back on.....main deal is the swingarm bolt, it should be replaced as I think they are too small and fragile, get a slightly thicker and longer bolt and put it in if you have to bang it with a sledgehammer...it's not worth the risk having it break like mine did......other than that the bike is good enough for me and I can't wait to start riding it again....other notes.....side panels do not line-up right.must have been bent in with machines,might get small engine oil leaks...front fender is more durable than you think.good luck, best mod I made was a 45watt headlight.had to unplug the license plate light to run it! P.S. As hard as it is not to do..do not BABY this bike.it will only let you down.take the good with the bad and hope you survive..just like with any bike!
	0