Go Back   ChinaRiders Forums > Technical/Performance > Other Brands
Register FAQ Community Calendar Today's Posts Search
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-24-2009, 07:56 PM   #7
knothead   knothead is offline
 
Join Date: May 2007
Location: In the land of the busted up ricebowl
Posts: 815
When I had my Yamaha TDM the diaphragm/slide assemblies were $135 each, turns out that a Suzuki DR650 had the exact same diaphragm and they were only $20. Look for a bike with a similar carb (the TDM had Mikuni BDST 38 downdrafts, the DR has a BST 40). It might take some hunting and it helps if you can look at the diaphragms side by side. Having a good relationship with a local dealer helps!

The Kaw dealer should carry all of the o-rings you need for your carbs. Don't be scared to go in and price the parts. Bike bandit wanted over a dollar each for the o-rings I needed, the dealer prices ranged from ten cents to fifty cents... I got everything I needed for less than $10, including the gaskets. I was too late in matching up the diaphrgams though! The Harbour Freight o-ring kits won't have everything you need.

That Vulcan 750 should make a good first bike. They are a little underpowered, low and docile. Good things when you're learning.


 
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:14 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.