![]() |
#61 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
I'd consider 5 MPH within specs
![]() Q, with its larger than stock front tire, reads accuratly. Go figure. In any even, your bike's got gumption! ![]()
__________________
Happy to serve. |
![]() |
![]() |
#62 |
Join Date: Jan 2010
Posts: 31
|
LoL gumption
![]() ![]() |
![]() |
![]() |
#63 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
Make sure you can get parts for that one. :P
__________________
Happy to serve. |
![]() |
![]() |
#64 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Even with assistance from the wind, 79.3 mph is good performance from a 400cc bike, Think.
![]() ![]() ![]() Spud ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
![]() |
![]() |
#65 |
Join Date: Sep 2010
Posts: 20
|
Factory states that top speed is 120 km/h. I have not used GPS as of now but will try that next week if we do not get snow first. I think that bike goes that 120 easily, my anyway after that new carb with pumper.
It picks up speed much faster now than with stock carb. I have not really tried top speed because i am scared to take it too high rpm and maybe blow up motor. I guess that there is rev limiter anyway ? |
![]() |
![]() |
#66 |
Join Date: Sep 2010
Posts: 20
|
I forgot to mention that i did get one of those electric bikes too same time as 400. It did work good but i sold that to one lady and she uses it to go to work. She told me that men would not belive their eys when she passed them on uphill with easy. She is so happy with bike.
|
![]() |
![]() |
#67 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
How many watts was the bike Finn?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#68 |
Join Date: Sep 2010
Posts: 20
|
That bike was TDE202Z1, 150W motor.
You have to keep pedalling, even slowly, that motor keeps working. When you start going from standstill, its taking few pedallings before motor starts assisting. This is way in European bikes anyway. |
![]() |
![]() |
#69 |
Join Date: Sep 2008
Location: central PA
Posts: 770
|
pitster speedo cable
Finnrider, and other pitster owners,,, could you look at your speedo cables and if your around any other bikes try and make a comparison ,,,..Maybe something else will fit ,,that goes for any parts,,, if anyone figures out any parts crossover,,please help us other owners out,, as I'm not sure if parts are going to be avail.
__________________
2015 zongshen rx3,,(Sold),,,2016 bashan storm,,2005 Harley ultra classic. |
![]() |
![]() |
#70 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Fish, there will be speedo parts out there, we just have to figure it out. Can you start with a photo that shows both ends of the cable?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#71 |
Join Date: Oct 2009
Location: Alberta, Canada
Posts: 3,274
|
If the cable itself broke, could a competent welder braze it back together?
|
![]() |
![]() |
#72 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
![]() Spud ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
![]() |
![]() |
#73 | |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
Quote:
__________________
Happy to serve. |
|
![]() |
![]() |
#74 |
Join Date: Sep 2008
Location: central PA
Posts: 770
|
pitster parts
Well ,I was floored pitster called me today and said the parts are in ,,,so I gave them my c.c. # and they are being shipped ,,,,,,so maybe getting parts for the 400 is going to be possible for all those sittin on the fence.I got a cdi ,,front, rear brake pads,,,speedo cable , clutch cable and throttle cables. So if pitster is watching ,,,THANKS.
__________________
2015 zongshen rx3,,(Sold),,,2016 bashan storm,,2005 Harley ultra classic. |
![]() |
![]() |
#75 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
Praise God. Great news. It certainly took a while and a lot of time and work on your part. What about the engine case?
__________________
Happy to serve. |
![]() |
|
![]() |
![]() |
|
|