06-07-2007, 09:20 PM | #1 |
where to buy 17t front sprocket
mine came with a 15/46 and i have plenty of power but cruise speed is 30-35
at 45 its reving more then i am comfortable with my bike seem to have a really low final ratio has oddball shift pattern of all down not rotary tho looking for somewhere to get the 17T from |
|
|
06-07-2007, 10:14 PM | #2 |
Join Date: Jan 2007
Location: Bradenton, Florida
Posts: 1,200
|
Crazy,
Contact Bruce at EJ Cycles he is a member of this site, If he dosen't have any in stock he will point you in the right direction to find one...
__________________
06 Lifan 200 GY-5 |
|
06-08-2007, 07:34 AM | #3 |
Join Date: Jan 2007
Location: Northern Vermont, USA
Posts: 1,271
|
What's your bike? If 15/46 is pinned at 45, 17/46 is gonna be pinned at 55. What cruising speed are you looking for out of your bike?
__________________
First Chinabike: 2006 Roketa RSX200E Current Chinabikes: 2023 Titan DLX & 2022 Lifan KP Mini w/ 210cc BRT kit, 22 RWHP! |
|
06-08-2007, 09:32 AM | #4 |
no its not pinned at 45 it will hit about 55 pinned but even a 10mph increase will be a an improvement
my bike is a NST new star tech db-200 .... even tho i ordered a roketa db-07 from xxx they sent me this |
|
|
06-08-2007, 01:40 PM | #5 |
Join Date: Jan 2007
Location: Northern Vermont, USA
Posts: 1,271
|
Hey where abouts in NH are you? I am about 35 miles from the border crossing into Littleton. If you are close, we should plan to meet up once you get your "cruising" sprocket on. I have yet to see another China DS in VT.
__________________
First Chinabike: 2006 Roketa RSX200E Current Chinabikes: 2023 Titan DLX & 2022 Lifan KP Mini w/ 210cc BRT kit, 22 RWHP! |
|
06-08-2007, 03:43 PM | #6 | |
Join Date: Sep 2006
Location: COLUMBIA, SC
Posts: 973
|
Quote:
Jason
__________________
2008 Jonway MC-70-150 2007 Roketa DB-07B (RSM-200E) 2006 Roketa DB-07A (RSX-200E) 1995 Kawasaki Concours (ZG1000) |
|
|
06-08-2007, 04:27 PM | #7 |
i am not that close to VT sadly i live on mass border bout 20 miles from hampton beach. Newton,NH
my manual says nothing on it ...i got a Video CD with the bike that says kinroad ...but side of motor says new star and decals say NST 200 its pushrod motor i am going to get some pics up this weekend i have a like 110km on it so far so good ....no luck finding a 17t yet =( |
|
|
06-08-2007, 04:35 PM | #8 |
i checked out your pics not the one i got.... mine production date 12/2005 and town registered it as a 2005 real bummer there and mso listed it as 2005 too what can ya do tho
|
|
|
06-10-2007, 08:35 PM | #9 |
Join Date: Mar 2007
Location: massenaNY
Posts: 25
|
17 tooth front sprocket
i have one on the way right now and a new gold chain for my roketa i ordered them today from www.scooterparts4less.com the chain was 31 dollars with shipping and the sprocket was 14 dollars with shipping.
|
|
06-10-2007, 09:10 PM | #10 |
yea i looked into there ...but his site just says for bigger motors '''not what motor tho so fit is questionable still ...hopefully it is the right one tho ...i have played e-mail tag with him...he responded quick.... but first i asked if was fit the 200cc lifan/roketa/viva fml motors...he replied did not know... i sent him picture and size of it 17mm20mm center...he said he would check .. have not heard back ..but i am crossing my fingers he might have right ones...
|
|
|
06-11-2007, 07:12 AM | #11 |
quick update he e-mail me back and verified it is the right one.
i have to give spooterpart4less credit... guy was much more helpful and quick to respond then most any other place i have dealt with |
|
|
06-12-2007, 05:07 AM | #12 |
Join Date: May 2007
Posts: 6
|
I think I have the same NST as you. Mine came with a 15F/46R combo. I found some tips in other postings and converted it to a 520 chain with a 14F/35R for road and got a 11F for trail (I got the parts at a local Honda dealer). It didn't take long to do the conversion and now cruises well at 55. It still seems to have good pep so I may go down to a 33 on the rear just to see what happens. I believe they are push rods engines from what I can tell but seem to be good bikes. The only problem I have had was the throttle sticking on a ride last Saturday night. Found a burr on the plunger that the needle rides on. If you feel any stickyness in your throttle you may want to check it before it locks up on a ride. It sounds like it has happened to a couple of other people from what I have gathered on this site. There are some good pics on how the carb is put together in the tech section.
__________________
Tbone "I don't know where we're going but there's no sense being late!" 2005 NST DB-200- 520 chain mods with 14F/35R |
|
06-12-2007, 09:23 AM | #13 |
sounds like it ..it is a pushrod motor..... i was sorta mad the bike i ordered has the ohc ...but worst thing has been the all down shift pattern after riding for many years i am programed for normal pattern.. i am going to switch to the 520 soon i am sure i got the 17t to hold me over till i do it
|
|
|
06-12-2007, 10:08 AM | #14 |
Join Date: Jan 2007
Location: Northern Vermont, USA
Posts: 1,271
|
That looks like a pretty good supply of parts there. Nice to know the guy cares and responds to questions.
__________________
First Chinabike: 2006 Roketa RSX200E Current Chinabikes: 2023 Titan DLX & 2022 Lifan KP Mini w/ 210cc BRT kit, 22 RWHP! |
|
06-12-2007, 05:00 PM | #15 |
Join Date: Apr 2007
Location: Toronto Ontario Canada
Posts: 2,585
|
I have checked at three different bike shops to order a 17 tooth/428/front sprocket. I have the list of bikes that match mine. No one can order anything bigger than a 15 tooth, which I have. My wife does not like sending credit card info over the net, so I won't do it. :evil: Getting a little frustrated :evil: I don't know what I'm doing wrong, it should be easy. I think they are trying to order a 520 size and saying 15 is as big as they come.
If anyone is doing a 520 conversion, and they don't need their 17tooth JTF259 front sprocket, PLEASE PM ME :( Name your price, and I'll pay postage too. |
|
|
|
|
|