03-15-2020, 06:09 PM | #1 |
Join Date: Feb 2020
Location: North East Pa.
Posts: 72
|
Hi risers for handlebars...
Just wondering how popular risers are on these dirt bikes. Recently ordered a set that are 1.2 inch in additional height. I might have gone higher but that might necessitate moving cables and the like which I'd rather not do. Figured this would be the least expensive way to find out if its a noticeable difference. I know the height could vary greatly depending on the size of the rider and personal preferences. In the scheme of things I'm just curious how many guys end up doing it vs letting them stock.
|
|
03-19-2020, 01:14 PM | #2 |
Join Date: Feb 2020
Location: North East Pa.
Posts: 72
|
Interesting... no one has tried this. Even though there's obviously little interest I still may offer up a post after I've tried them. Maybe everyone is changing bars instead ?
|
|
03-19-2020, 01:18 PM | #3 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
There are a few members that have them installed. Megadan for sure has them installed on his Hawk.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
03-19-2020, 03:06 PM | #4 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
Yep, riser adapters for my Renthal Fat bars. I don't have a good close up shot of them, but you can see them in this one clearly enough.
[IMG][/IMG]
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
03-19-2020, 03:21 PM | #5 | |
Join Date: Feb 2020
Location: North East Pa.
Posts: 72
|
Quote:
Nice setup by the way... |
|
|
03-19-2020, 04:19 PM | #6 | |
Join Date: Dec 2016
Location: Argentina
Posts: 756
|
Quote:
On my hawkesque, i put a clone of a renthal handlebars, first no risers and i found out that without them, start button and other parts will hit the plastics of the tank. This are the ones i had. |
|
|
03-19-2020, 08:33 PM | #7 | |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
Quote:
I have them adjusted to suit my height/build. A little bit forward of alignment with the forks and the bar ends parallel with the ground. Nothing hits, nothing needed changing.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
|
|
|
|