06-24-2009, 12:39 PM | #1 |
Join Date: May 2009
Posts: 42
|
Which stator kit and flywheel puller for 150cc
I have a pretty standard looking 150cc gy6 based Baja sc150 branded branded piece of shit scooter that only made it 65 miles and then died. Needs a new magneto kit.
I have ordered and received a 6 pole flywheel and magneto kit and now I don't know for sure if that's the right one maybe I should have gotten an 8 pole or 12 pole? I haven't been inside it yet because I don't have a flywheel puller, I'm about to order the puller. Are they all 37mm x 1mm on all the 150 gy6's? Just trying to make sure I get/have the right things. At first I thought all 150cc gy6's were the same but since I've learned there are different measurements for mounting and different size final drive shafts. I almost bought the wrong gy6 engine complete as a backup. |
|
07-01-2009, 02:14 PM | #2 |
Join Date: Apr 2007
Location: tennesse
Posts: 95
|
you really should have open up her before ordering the part.i have the standard pulleys for those gy6 scooter if you email me from my site i maybe can help you.
good luck gregg
__________________
dirty south choppers LLC www.roketaparts.net powersports dealer parts and service www.sunlparts.net kelly stevenson and Gregg martinez sales@sunlparts.net |
|
|
|
|
|