07-11-2011, 11:39 AM | #1 |
Join Date: May 2008
Location: Ontario, Canada
Posts: 327
|
HSUN200GY parts required...
I need to get the following items for my HSUN200GY.
It requires: • clutch rebuild (six springs) Pieces are falling of the fried plates right now. • clutch hand lever (mine is cracked) • 35' or 37" Speedo cable (mine is 37") • rear left turn signal cover I could use a seat as well. I thinned mine out for a short legged rider.
__________________
Riding a blue plated HSUN 200GY (Otherwise know as a ULIKE 200GY, SUNL 200GY or a VIVA SX200S), a 2010 Gio Mini Hummer 110cc ATV, 2010 Gio T3 Rebel ATV, and a 2002 Kawasaki KLR650, 70cc Katera dirtbike, and a 49cc GIO dirtbike...so far! |
|
07-11-2011, 03:41 PM | #2 |
Join Date: May 2008
Location: Ontario, Canada
Posts: 327
|
OK, NIX the clutch.
I just pulled the one out of my dead (smoker) GIO 200ccT3 and put it into the 200GY. Runs great now. PS: I did not use the springs from the T3 as they where shorter that the ones on the GY. Made my oil filter (or whatever it's called) tool from a $3.50 socket from Princessauto. 22mm I believe, it had a 30mm OD.
__________________
Riding a blue plated HSUN 200GY (Otherwise know as a ULIKE 200GY, SUNL 200GY or a VIVA SX200S), a 2010 Gio Mini Hummer 110cc ATV, 2010 Gio T3 Rebel ATV, and a 2002 Kawasaki KLR650, 70cc Katera dirtbike, and a 49cc GIO dirtbike...so far! |
|
07-11-2011, 11:34 PM | #3 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I'd be checking the local bike shop for the lever (bring the lever and perch in to match it up) and eBay for the other stuff.
May we see a pic of the socket? I just used a regular 1/2" drive socket; what's different about yours?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
07-12-2011, 08:24 AM | #4 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
I may have a seat for you.
|
|
|
|
|
|