Quote:
Originally Posted by pyoungbl
We have a couple rainy days to justify shop time so I adjusted the valves on my trusty Zong. This was also an opportunity to modify the CSC aluminum bash plate. Taking a cue from this forum I reversed the front mounting bolts so the nuts will now be facing the front wheel and thus easier to work with. This turned out to be a super easy mod:
|
Good cutting down the skid plate so it will rotate. I like that a lot.
Also, I tried to do reverse the front mounting bolts, but was not successful. I put a socket underneath and hit the top of the bolt with a hammer, but they just wouldn't budge. Any tips?