ChinaRiders Forums - View Single Post - Adding brake lights with 4-wire turn signals

detours · 05-31-2016, 12:33 AM

Although you can see the turn signal mounts, I couldn't find a way to unbolt them without removing the tail assembly.

First, remove the easy parts. I forgot to take pics of this part, but it's pretty simple.

Remove both seats.
Remove the top box by undoing 3 bolts under the foam liner.
Remove the passenger grab handle by undoing the 2 side bolts and 1 top bolt. Be careful not to scratch the rear body panels.

05-31-2016, 12:33 AM	#2
detours Join Date: Sep 2014 Location: Arvada, CO Posts: 1,004	Step 1: Remove the tail end components Although you can see the turn signal mounts, I couldn't find a way to unbolt them without removing the tail assembly. First, remove the easy parts. I forgot to take pics of this part, but it's pretty simple. Remove both seats. Remove the top box by undoing 3 bolts under the foam liner. Remove the passenger grab handle by undoing the 2 side bolts and 1 top bolt. Be careful not to scratch the rear body panels. __________________ Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol Last edited by detours; 05-31-2016 at 11:02 AM.
	0