How to install your 13T sprocket

detours · 08-17-2015, 01:00 AM

I installed my 13T countershaft sprocket today, replacing the stock 14T sprocket. This is a great way to widen the powerband of the engine and make your gearing more usable, especially on hills. It also gives you a usable 6th gear.

The swap was very easy, even though I had never done it before.

Tools Needed

8mm socket - countershaft sprocket cover bolts
13mm socket - outside axle locknut
13mm open ended wrench - inside axle locknut
18mm socket - left side axle bolt
19mm socket - right side axle nut
30mm socket - countershaft sprocket nut
Large flat blade screwdriver - countershaft sprocket safety washer

08-17-2015, 01:00 AM	#1
detours Join Date: Sep 2014 Location: Arvada, CO Posts: 1,004	How to install your 13T sprocket I installed my 13T countershaft sprocket today, replacing the stock 14T sprocket. This is a great way to widen the powerband of the engine and make your gearing more usable, especially on hills. It also gives you a usable 6th gear. The swap was very easy, even though I had never done it before. Tools Needed 8mm socket - countershaft sprocket cover bolts 13mm socket - outside axle locknut 13mm open ended wrench - inside axle locknut 18mm socket - left side axle bolt 19mm socket - right side axle nut 30mm socket - countershaft sprocket nut Large flat blade screwdriver - countershaft sprocket safety washer __________________ Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol Last edited by detours; 08-17-2015 at 02:37 AM.
	1