06-30-2021, 02:03 PM | #1 |
Join Date: Jun 2021
Posts: 21
|
Hawk 250 Seat Bolts
Hey guys, does anyone by chance know the type of bolts size/thread that are used to hold the seat in place?
One of mine rattled off. Thanks in advance. |
|
06-30-2021, 02:30 PM | #2 |
Join Date: Mar 2021
Location: New Hampshire
Posts: 242
|
I don't know off the top of my head, I just stopped by to say I read the title as "Hawk 250 Seat Belts" LOL
It's too bad the damn thing is bolted on to begin with, you can't get under the seat easily which is silly as there's storage space.
__________________
2020 RPS Hawk 250 - Build thread can be found here: http://www.chinariders.net/showthread.php?t=28374 "Do Wheelies and Forget your Feelies" "If vegetarians eat vegetables, what do humanitarians eat?" -unknown |
|
06-30-2021, 02:32 PM | #3 |
Join Date: Oct 2020
Posts: 130
|
|
|
06-30-2021, 02:38 PM | #4 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,705
|
I couldn't find one in metric sizes so I ran a 1/4-20 tap through mine and installed one of these wing bolts. https://www.lowes.com/pd/Hillman-Rep...-Knobs/4757889
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
06-30-2021, 03:08 PM | #5 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
Thread is M6x1.0 Length should be at least an inch, or 25mm. The link provided by Jersey to the thumb screws is a great way to secure the seat while allowing it to be semi removable if you also secure the side panels with them.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
06-30-2021, 03:45 PM | #6 |
Join Date: Jun 2021
Posts: 21
|
Thanks guys exactly the info I was looking for.
|
|
06-30-2021, 06:10 PM | #7 |
Join Date: Dec 2018
Location: PNW
Posts: 983
|
Great ideas! I put some small pieces of copper pipe on my screws about the width of the seat to keep the seat plastic from being chewed.
|
|
07-01-2021, 10:02 AM | #8 |
Join Date: Nov 2020
Location: Bloomington, IN
Posts: 56
|
If one fell off, then you have one left. Take it off and run to the hardware store with it - they have a replacement.
|
|
07-01-2021, 11:29 AM | #9 |
Join Date: Jun 2021
Posts: 21
|
I was just being lazy lol I was already out and about and got the replies I needed to get it while I was out.
|
|
|
|
|
|