![]() |
#11 | ||
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
Quote:
![]() Yes, the switch can easily get stalled in a 'dead' position. In fact, my light switch used to stall in a 'dead' position. Then the low beam would not work. Finally, the light switch would not work for either beam in any position. ![]() I took the switch apart, and it is not designed in such a way so it can be repaired. Therefore, I cleaned the switch, and applied dielectric grease to the contacts, but it was dead. ![]() I contacted CSC, and they sent me a new switch. CSC has excellent customer service, which is unparalleled in the world of Chinese motorcycles, and excellent for bikes from any country of origin. ![]() I removed the slide switch which controls the headlights from the old switchgear, and I installed a nice toggle switch, instead. ![]() ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
||
![]() |
|
![]() |
|
|